ILLUMRA, the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, announced today the release of their SLT (Switch Leg Transmitter) wireless sensor. The SLT wireless sensor is used to extend the control of one branch circuit to other branch circuits without installing wires between them. The SLT wireless sensor connects to an existing switched load and transmits a control signal to an ILLUMRA wireless receiver, which in turn, switches a distant load. The distant load follows the existing load with both loads turning on and off simultaneously.

The SLT wireless sensor is compatible with existing ILLUMRA wireless receivers. As with all ILLUMRA wireless devices, the SLT wireless sensor is easy to install and easy to use. The new sensor reduces cost by eliminating expensive materials and eliminating tedious and time-consuming labor. The SLT wireless sensor can control an unlimited number of ILLUMRA wireless receivers as long as they are within 150 feet of the SLT wireless sensor. Each ILLUMRA wireless receiver can respond to as many as 30 different SLT wireless sensors. “The introduction of the SLT wireless sensor to the ILLUMRA line increases the flexibility of the entire line”, explained Jan Finlinson, Vice President at ILLUMRA. “Successful companies are always looking for ways to increase efficiency, reduce costs, and save energy, which is why ILLUMRA is gaining so much momentum in our industry. Our customers are finding more and more ways to apply ILLUMRA controls. With the SLT wireless sensor, the possibilities are vast, indeed”, said Finlinson.

As lighting circuits are added to a building, integration with existing control systems may be costly, complex, and/or impractical. With the SLT wireless sensor, the action of the existing lighting control can be duplicated on the new lighting circuit. For example, when task lights are added to work surfaces in an industrial manufacturing facility, the control circuits from the existing lighting systems are not available at floor level, but power is already wired to the bench-top. Installation of a SLT wireless sensor at an existing controlled load will transmit a signal to ILLUMRA wireless relay receivers installed at the bench-top, avoiding wasted energy due to task lights left on unnecessarily.

Buildings using the SLT wireless sensor and other ILLUMRA products: qualify for LEED credits, may qualify for Energy-Star ratings, require fewer materials and less labor during installation, and have the ability to use less energy. The SLT wireless sensor is manufactured to the latest quality standards in an ISO 9001:2000 facility, is RoHS compliant, is FCC and IC approved, has earned safety approval listing status according to applicable UL and CSA standards, and bears the ETL safety listing mark.

About ILLUMRA

ILLUMRA is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol, the de facto standard for energy-harvesting wireless controls. EnOcean technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or temperature differentials in the environment provide power to ILLUMRA transmitters, providing zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information, please explore www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

ILLUMRA, the leader in wireless battery-free controls, announced the release of a new solar powered wireless Door/Window Sensor. This new product maximizes the energy savings of heating and air conditioning systems by providing wireless status of windows and/or doors. The breakthrough technology may be seen at the GreenBuild Show in Chicago, Illinois (EnOcean/ILLUMRA booth #583).

Energy waste can be reduced by 20 to 60 percent by disabling blowers and/or adjusting temperature setpoints in HVAC systems when windows and doors are left open. The wireless Door/Window Sensor is a key component to reducing energy waste in hotel, condominium and dormitory buildings.

“We are excited to help building operators reduce energy waste through the use of the easy to install, tamper resistant, maintenance free window/door sensors,” said Jan Finlinson, Director at ILLUMRA. “Energy management professionals can leverage this product to reduce operating costs and the environmental impact of the buildings for which they are responsible.”

The wireless battery-free sensor communicates using the EnOcean protocol to a variety of compatible actuator and controller products: thermostats, relays, room controllers; as well as BACnet and Ethernet gateways for integration with energy management systems. The sensor also includes on board energy storage that can operate the device in darkness for several days.

The ILLUMRA light sensor is small, measuring only 3.86 x .62 x .81 inches (98.04 x 15.75 x 20.57 mm) and attaches easily to doors and windows (peel and stick). The ILLUMRA light sensor is made of recyclable plastic, is RoHS compliant, qualifies for LEED credits and helps buildings comply with International Green Construction Code standard 189.1.

About ILLUMRA
ILLUMRA is the largest North American supplier of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. ILLUMRA products operate using the EnOcean protocol: the standard for low-power wireless communication. Transmitters harvest the energy they require from the motion of a switch, light on a solar cell, or from temperature differentials. This allows them to operate indefinitely without the use of batteries. Products are sold via dealers and OEM partners throughout the world. For more information about ILLUMRA and its products, please visit www.ILLUMRA.com, or call (801) 349-1200.

ILLUMRA, the leader in wireless battery-free controls, announced that their new LED dimmers reduced energy consumption up to 75 percent on light poles installed for the 2010 Vancouver Winter Games. The ILLUMRA LED dimmers were installed on outdoor LED light poles along a pathway between venues at the Winter Games. LED street lamps use about 25 percent less energy than conventional metal halide fixtures (source: TIME). ILLUMRA dimmers dramatically improve this savings. This breakthrough technology may be seen at the upcoming LIGHTFAIR trade show in Las Vegas (EnOcean/ILLUMRA booth #2027).

“LED dimmers are a great way to save energy,” said Jan Finlinson, director at ILLUMRA. “By reducing the output of the lights when no one is on the pathway, customers achieve significant energy savings while maintaining a level of security, ambiance and convenience for venue attendees.”

Each pole is equipped with a light sensor, LED lights, motion sensors and ILLUMRA wireless LED dimmers. The equipment keeps the lights dim when no one is on the pathway, and turns the LEDs to full brightness when pedestrians are near. Wireless signals share pedestrian occupancy status among the network of light poles.

The system works by sensing motion along the pathway, allowing the network of dimmers to adjust their light levels based on the movement. When no motion is detected, the lights dim, consuming 75% less energy.

“The immediate energy savings and long term life cycle cost of LED lighting make it a compelling solution for energy efficiency,” states Dr. Bernell Stone, energy analyst and Silver professor of finance at Brigham Young University. “Energy management technology like that offered by ILLUMRA accelerates the payback period for LEDs, making this innovation a powerful contributor to energy efficiency.”

The wireless dimmers from ILLUMRA provide ultra smooth LED dimming with industry-leading performance of 65,000 dimming steps, thus eliminating the flickering at low light levels that other LED dimmers exhibit. The units can dim up to 5-ampere loads of either 12V or 24V LED lights.

About ILLUMRA  
ILLUMRA is the largest North American supplier of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol: the standard for low-power wireless communication. Transmitters harvest the energy they require from the motion of a switch, light on a solar cell, or from temperature differentials. This allows them to operate indefinitely without the use of batteries. The ILLUMRA product line includes multiple products that operate in the uncrowded 315 MHz band, offering greater transmission range than other wireless technologies and minimal competitive traffic. Products are sold via dealers and OEM partners throughout the world. For more information about ILLUMRA and its products, please visit www.ILLUMRA.com, or call (801) 349-1200.

###

ILLUMRA, a leader in lighting control and energy management systems, announced selection by New York City’s Municipal Entrepreneurial Testing System (METS). The pilot program includes two of ILLUMRA’s products, the self-powered wireless occupancy sensor, and the M3 wireless steam valve control. The wireless products save energy, time and money and are designed to install in as little as 20 minutes with minimal disruption to building operations. The systems will be installed in various city buildings, where cost savings will be monitored and evaluated for wider deployment within the city.

“We’re excited to be chosen by the METS program and look forward to the opportunity to show how our wireless control products can save New York City both time and money,” said Jan Finlinson, ILLUMRA CEO. “Our unique green technology can be retrofitted economically and easily in any government or commercial building.”

METS is a NY city partnership of Speaker Christine C. Quinn, Council Member Michael Nelson, the Department of Citywide Administrative Services (DCAS) and the New York City Housing Authority (NYCHA), to promote green technologies in city buildings. In addition to the METS initiative, ILLUMRA will be highlighting its latest lighting control products at the LIGHTFAIR International tradeshow and conference in Las Vegas, Nevada on May 9-11 (EnOcean Alliance Booth # 612).

About ILLUMRA

ILLUMRA is a leading North American supplier of lighting control and energy management systems. ILLUMRA is an EPA Energy Star Partner and develops wired and wireless HVAC and lighting controls for commercial buildings. Products are sold via dealers and OEM partners throughout the world. For more information about ILLUMRA and its products, please visitwww.ILLUMRA.com, or call (801) 349-1200.

ILLUMRA, the leader in innovative energy saving controls, announced the release of the CMR.The ILLUMRA CMR works with any Dawn/Dusk sensor to reduce energy consumption by 50% by shutting off lights during the second half of every night. One device is installed per pole or fixture to shut off lights not needed for maintaining safety lighting levels. The CMR automatically synchronizes to existing dawn/dusk sensors and adapts tochanging seasons. The CMR limits peak demand inrush through sequenced start up.

“The CMR gives building owners a powerful tool to control outdoor lighting costs,” said Jan Finlinson, director at ILLUMRA. “The easy-to-install low-cost solution will fill a niche that has been missing in the marketplace.”

The CMR is a great solution for parking lots, parking garages, streetlights, landscape lighting, and lights controlled by dawn/dusk sensors.

About ILLUMRA
ILLUMRA is a leading North American supplier of lighting control and energy management systems. ILLUMRA is an EPA Energy Star Partner and develops wired and wireless HVAC and lighting controls for commercial buildings. Products are sold via dealers and OEM partners throughout the world. For more information about ILLUMRA and its products, please visit www.ILLUMRA.com, or call (801) 349-1200.

###

ILLUMRA, the leader in wireless battery-free controls, announced it has signed an exclusive agreement to sell the Probare P30 link analyzer in the United States and Canada. The new product allows specifiers and installers to plan, verify and maintain EnOcean based wireless networks. The hand-held analyzer is available in 315MHz and 868MHz versions. The new product can be seen at LIGHTFAIR International (LFI), May 17-19 in Philadelphia in EnOcean/ILLUMRA booth #2345.

“We are happy to strengthen our relationship with ILLUMRA by offering the P30 through their professional organization,” said Thomas Rieder, managing director at Probare. “Their knowledge and experience with EnOcean products and technology compliment the features of the P30. The powerful tool allows planners and installers alike to save time and money while providing confidence about the reliability and quality of their installations.”

“With a large backlit LCD display that is easy to read even under difficult lighting conditions,” said Jan Finlinson, director at ILLUMRA. “The P30 is a great tool for creating EnOcean based control networks.”

The analyzer has four analyzer modes that test links, repeaters, and networks and also includes the ability to remotely control EnOcean based products. Power is supplied from two “AA” batteries. A wide-range AC power supply, including a USB plug, comes with the P30, which allows long-term logging of the radio channel, including: timing, signal strength, and packet data.

The P30 can communicate with PC’s via USB. WinEtel and Dolphin View tools from EnOcean are supported for development engineers and field application experts. USB drivers are available for Windows, Linux and Mac OS-X.

ILLUMRA wireless automation systems provide valuable benefits for business owners moving to new locations. Whether a new building is being planned or an existing structure is being remodeled, ILLUMRA control systems can help tenants of new locations cut costs and get businesses up and running faster.

Opening a new business location can be time consuming and costly; often electrical systems are the cause of these problems. Electrical plans of new structures take time to design and install. Interior electrical systems of existing structures often need to be remodeled and customized to fit the needs of new tenants. In both new and existing buildings, business owners lose money each day the opening of business operations is delayed.

ILLUMRA provides the most adaptable wireless control system for commercial buildings. ILLUMRA automation systems offer easy-to-install lighting, occupancy, and HVAC controls. These control systems are the answer for businesses seeking to cut costs, save time, and increase profits.

New structures:

In preparing electrical plans, finalizing placement of light locations, switch locations, switch legs, and traveler wires consumes valuable time and adds days to project schedules. ILLUMRA controls do not use switch leg or traveler wires and surface mount anywhere once the building is finished. This speeds up electrical planning and simplifies installations. The design-build process, a increasingly popular method of completing builds on time and under budget, involves completing some portions of a project before all building plans are finalized. This process requires that technologies installed do not restrict portions of the project that lie ahead. In the design-build process ILLUMRA control systems eliminate difficulties arising from design revisions and change orders. ILLUMRA receivers can easily be installed along with light fixtures throughout a building; ILLUMRA wireless light switches can then be added at convenient locations when the building is complete.

Existing structures:

Uses for commercial building space change regularly. When a new store or office replaces a previous tenant, significant and expensive electrical remodeling often takes place. When the commercial space contains an ILLUMRA controls system, little or no electrical remodeling is necessary. Surface mounted ILLUMRA self-powered wireless light switches can easily be moved to new locations that may be more convenient for the new building layout. ILLUMRA receivers can quickly be reprogrammed to customize light controls to the needs of the new tenant. Adaptable ILLUMRA controls save time and money for the new business and help the business get up and running faster.

Some homes were built without adequate lighting. This has forced many to purchase lamps of all sizes to illuminate some rooms in their home. The most difficult thing about using a lamp instead of installing a light fixture is controlling the actual light. Fixtures typically have a light switch. Lamps must be turned on at the source (usually by a pull string or other type of switch).

What if you want to control a lamp, or light requiring an outlet, with a light switch? Using our self-powered wireless light switch in combination with our plug-in relay receiver, you can control a lamp or light with a light switch. Do you want to know what the best part is? You wont have to touch a single wire! The wireless light switch can be placed anywhere. The plug-in relay receiver is powered by a traditional electrical outlet. All you have to do is plug in the lamp to the receiver, assemble the light switch, and you’re done! Your light switch can now be turned on and off by a light switch.

Check in with us later for more easy solutions to your home and business electrical needs.