Wireless Room Temperature Sensor

Part Numbers

SR04
Room temperature sensor only

SR04P
Room temperature sensor with set point adjustment

SR04PT
Room temperature sensor with set point adjustment, presence key (pictured)

SR04PST
Room temperature sensor with set point adjustment, presence key, fan speed switch

SR04P MS
Room temperature sensor with set point adjustment, slide switch O/I

SR04 rH
Room sensor humidity/temperature

SR04P rH
Room sensor humidity/temperature with set point adjustment

SR04PT rH
Room sensor humidity/temperature with set point adjustment, presence key

SR04P MS rH
Room sensor humidity/temperature with set point adjustment, slide switch O/I

Description

The Room Temperature Sensor sends a wireless signal to a receiver whenever the temperature falls out of the preset range. Features include a occupancy push button and temperature adjustment knob.

Specifications
SR04xx
Transmitting Range	50-150 feet (typical)
Antenna	Type: Helix – Gain: -3dBi
Transmitting Frequency	315 MHz
Temperature Detection	Range	0°C to 40°C
""	Resolution	0.15K
""	Absolute Accuracy	typ. ±0.4K
Optional Humidity Sensor	Range	0-100% rH
""	Resolution	0.4% rH
""	Absolute Accuracy	typ. ±3% Range 30% . . . 80%
""	1 Point Callibration	50%
Optional Set Point Adjustment P	Range	0-270° Angle of Rotation
""	Resolution	1.1°
Rotary Switch S	Number of Switching Steps 5 (A- 0- I- II- III)
Slide Switch MS (optional with button T)	Number of Switching steps 2 (O/I)
Measuring Value Detection	Every 100 Seconds
Sending Interval	. . . every 100 seconds
Energy Generator	Solar cell/ internal goldcap/ maintenance-free
Enclosure	ABS (ASA) color pure white similar to RAL 9010
Protection	P20 according to EN60529
Ambient Temperature	-25°C to 65°C
Transport	-25°C to 65° C/max. 70% rH – non-condensed
Weight	1.76oz. (50g)
Radio Certifications	FCC (U.S.) – IC (Canada)

Downloads

Applications

None

Wiring Diagrams

None

Thank You

Thank you for contacting us!

Where we go from here

We will get back to you as soon as possible depending on the number of requests we have.

If you would like to reach us sooner, feel free to call us at (801) 349-1200.

A Sneak Peek: ILLUMRA Climate Controls

ILLUMRA previewed its soon-to-be released thermostat at the recent AHR Expo 2009 in Chicago. The new thermostat provides quick and easy implementation of energy saving HVAC controls without running any new wire. The EnOcean compatible thermostat plays a key role in allowing energy saving ILLUMRA controls to be used with HVAC systems.

The ILLUMRA Thermostat wirelessly communicates with transmitters and receivers already a part of the ILLUMRA product line. For example, a Keycard Access Switch may be used to control the thermostat in a hotel room. An ILLUMRA motion sensor or Room Controller may control the thermostat in an office building or other commercial setting. When the thermostat receives “occupied” or “unoccupied” signals from ILLUMRA transmitters, the thermostat adjusts temperature set points accordingly to conserve energy.

Along with the coming thermostat, ILLUMRA offers several other products that assist in energy conservation and can be used in connection with HVAC systems. These include the SLT Wireless Sensor, Wireless Motion Sensors, the ILLUMRA Room Controller, the Wireless Room Temperature Sensor, and the Keycard Access Switch. Below is a brief overview of how each system component may be used to reduce energy consumption of HVAC units.

SLT Wireless Sensor
The SLT Wireless Sensor expands the energy saving abilities of HVAC control systems by allowing light controls to be added to HVAC systems. The SLT transmits a wireless signal each time power is turned ON or OFF to the sensor. In a building where an HVAC system is installed, SLT Wireless Sensors can be connected to the HVAC unit to transmit signals according to timer presets that are programmed into the heating and cooling system. These signals are picked up by ILLUMRA receivers connected to lights and devices in the room, and allow lights to be turned off when the climate control system is in economy mode.

Wireless Motion Sensors
ILLUMRA Wireless Motion Sensors are self-powered and surface mount using no wires. They transmit occupancy signals to the ILLUMRA Thermostat and to ILLUMRA Relay Receivers that may be connected to lights or other electronic devices. When motion is not detected in a room, HVAC systems automatically set to economy mode and lights and devices turn off.

ILLUMRA Room Controllers
Room controllers may be connected to hardwired occupancy sensors to achieve the same functionality offered by ILLUMRA motion sensors.

Wireless Room Temperature Sensor
The Wireless Room Temperature Sensor is self-powered and surface mounts using no wires. The sensor can be used to monitor the temperature in a room and transmit that data to an ILLUMRA Thermostat. The thermostat then controls the HVAC unit according to programmed preferences.

Keycard Access Switch
The Keycard Access Switch is intended to help implement energy saving controls in hotel rooms. When guests enter their room and slide their room card into the Keycard Access Switch, an “occupied” signal is sent to an ILLUMRA Thermostat and to relay receivers connected to lights and devices in the room. The thermostat automatically adjusts temperature set points to a narrow range (i.e. 70-72 degrees) and power is provided to lights and devices in the room. When guests remove their room card an “unoccupied” signal is transmitted to the ILLUMRA Thermostat, setting the HVAC unit to economy mode and withdrawing power from lights and devices in the room.

Wireless LED Under Cabinet Lighting

ILLUMRA wiring diagrams

Application

Wireless LED under cabinet lighting with wired or wireless control.

Scenario

A homeowner wants to add LED under cabinet lights to the home after the kitchen had been built. Unfortunately, running wires to a new switch was not a practical solution.

Solution

ILLUMRA wireless under cabinet lighting, with their self-powered wireless switches, and wired or wirless dimmer solved the problem and allows homeowner to control the new or remodel under cabinet luminaries from several locations throughout the kitchen. The switches can be attached to the surface of the walls, without cutting into them or existing switch receptacle. The system is compatible with LED 12 or 24V LED lighting.

Products

Single Rocker Switch	Handheld Wireless Switch

Wired Dimmer

Wired ON/OFF Slider Dimmer

x= (3) MHz (9) Mhz

xx = FP Wire Trap Connector

xx = FL Flying Lead Wires

Basic Wireless Light Switch Kit

Part Number
ExT-S1AWH - Single Rocker Switch

ExX-R12-3HOTP - 120V Relay Controller

How To YouTube VIDEOs:

Description

A Basic Wireless Light Switch Kit controls one light or one group of lights with a wireless light switch. Use to relocate a switch to a new location, add wall switch to pull-chain light, install switch without pulling new wires, etc. This is a pre-configured set of one wireless switch and one controller.

One Self-Powered Wireless Light Switch can be configured to control an unlimited number of ILLUMRA controllers that are within range.

Specifications	Basic Wireless Switch Kit
Range	50-150 feet (typical)
Frequency	902 MHz
Switch Function	Top: ON – Bottom: OFF
Switch Power Supply	Micro-generator when switch is pressed
Controller Power Supply	120VAC
Relay Ratings	8 Amps Load
Channels	Digital encoding – relay links up to 20 switches
Dimensions	2.75(W) x 4.5(H) x 0.62(D) inches
Operating Temperature	-13° to +149°F (- 25° to + 65°C)
Radio Certifications	FCC (United States): SZV-PTM210U I.C. (Canada): 5713A-PTM210U
Addressing	Factory set unique ID (1 of 4 billion)

Downloads

Applications

Wiring Diagrams

Log Home Wiring Wireless Switch

Log Home Wiring

[testimonial author=”Jerome Serin”]”I worked for an electrical contractor for many years doing log home wiring and he read about your product in a trade publication as I was planning this project. We had wired a few log homes many years ago and ran into all sorts of issues. Making a log home project look good and doing so in a timely fashion is difficult. Your product has saved me hundreds of feet of wire and countless hours of labor. The ease of installation and simplicity is great and I would recommend this system to any contractor or homeowner.”[/testimonial]

Problem

Running wire to switch locations through solid log walls
Limited options for switch placement
Time consuming installation

Solution

Use wireless switches to simplify Log Home Wiring and allow switches to be installed anywhere without drilling logs.

Wireless lighting control eliminates the need to run wires from the light to the switch
Wireless light switches can be placed anywhere
No drilling channels in the logs to run wires and no routing of large holes for switch boxes

Benefits

Installation effort reduced to a minimum
Easy to move switches to different locations or add new ones later down the road
Save money and time

Products

Wireless Fan and Light Control

ILLUMRA wiring diagrams

Application

Finish projects faster! When compared with traditional switch solutions, contractors finish projects in 1/3 less time and use 1/3 less wire when using ILLUMRA Self-powered Wireless Controls.

Scenario

Using electric wire and standard toggle or Decora style switches to control a light and fan

Cut holes in the wall and ceiling to install wires between the fixture and switches
Install new switch boxes to house the 2-gang switches

Solution

No wire or switch boxes needed to install wireless switches

One receiver controls the light and the other receiver controls the fan
Both receivers are installed into the receptacle behind the fixture

Products

Dual Rocker Switch (Fan + Light) Relay Controller

Wireless Water Feature Control

\

ILLUMRA wiring diagrams

120V 3-Wire Basic (ExX-R12-3HOTP)

Application

Landscape water feature control switch.

Scenario

The home owner needed to be able to control the waterfall from a location within the home. The problem was that there was not an easy way to get wires from the wiring box near the pump to the inside of the walls of the home.Solution
ILLUMRA self-powered wireless switches were used. Switches were mounted on the surface of the wall in the home in several locations without cutting into the walls and without the need to install new wires. The ILLUMRA relay receiver was installed in the weather-proof, plastic wiring box near the pump.

Products

Single Rocker Switch	Receiver

Basic Wireless Switch Kit

X = (3) 315 MHz (9) 902 MHz

24VAC Wireless Thermostat

Colors and Part Numbers

White........E3X-T02-U2W

Description

The ILLUMRA 24VAC Wireless Thermostat allows quick and easy implementation of energy saving HVAC controls without running any new wire. The thermostat wirelessly communicates with ILLUMRA controllers, sensors, and switches such as our occupancy sensors, Hotel Keycard Access Switch, Wireless Room Temperature Sensors, and more. When the thermostat receives an "occupied" signal, it adjusts temperature set points to a narrow preset range (i.e. 69-71 degrees Fahrenheit). When the thermostat receives an "unoccupied" signal, it adjusts temperature set points to a wider range (i.e. 59 - 81 degrees Fahrenheit). When used with an EnOcean BMS Gateway, the thermostat can be connected to LON and BACNet HVAC control systems.

Specifications
E3X-T02-U2W
Range	50-150 feet (typical)
Frequency	315 MHz
Input Voltage	24 VAC
Max Loads	1.5 amp/circuit
Temperature Monitor Range	+32.0° to +99.9°F (0.0° to +37.7°C)
Temperature Set Point Range	+60° to +85 °F (+15.5° to +29.5°C)
Operating Temperature	+14° to +131°F (- 10 ° to +55°C)
Storage Temperature	-4° to +131 °F (-20° to 55°C)
Sampling Rate	Every 5 seconds
Display Format	Liquid Crystal Display (LCD)
Fan Control	Selectable: Auto Cycle: Low ; Medium; High; Economy: Off
Memory	Stores up to 30 switch IDs
Accuracy	+/- 1°F (0.5°C)
Heat/Cool Control	1 Heat and 1 Cool circuit / Heat pump reversing valve circuit
Dimensions	3.5 x 5.0 x 1.5 inches
Radio Certifications	FCC (United States): SZV-TCM2XXC & IC (Canada): 5713A-TCM2

Downloads

Applications

Energy Saving Hotel Room HVAC Controls

Wiring Diagrams

ILLUMRA Thermostat

Hotel Room HVAC Controls

Energy Saving Hotel Room HVAC Controls

ILLUMRA wiring diagrams

ILLUMRA Thermostat (E3X-T02-U2W)

Application

Retrofit a hotel room to reduce energy waste in unoccupied rooms.

Scenario

A hotel wants to cut its heating and cooling costs. To do this, the hotel plans to reduce energy consumption of PTAC units in unoccupied rooms. Currently the ventilation system in each room of the hotel is composed of a thermostat connected to a PTAC unit.

Solution

ILLUMRA Thermostats easily replace existing thermostats. The new thermostat communicates wirelessly with ILLUMRA transmitters and receivers. An ILLUMRA self-powered wireless Keycard Access Switch quickly surface mounts near the door inside each room. When a guest enters a room and inserts a room keycard into the keycard switch, the switch transmits an “occupied” signal to the thermostat. The thermostat receives the signal and automatically adjusts temperature set points to a narrow preset range (i.e. 69-71 degrees Fahrenheit). When the guest prepares to leave the room and removes the keycard from the switch, the keycard switch transmits an “unoccupied” signal to the thermostat. The thermostat receives the signal and automatically adjusts temperature set points to a wider range (i.e. 59 – 81 degrees Fahrenheit).

Additional Energy Savings:
Additional energy savings can be realized in this application by using ILLUMRA relay receivers to control lights and electrical devices in the room. When the Keycard Access Switch transmits a signal, lights and electrical devices will then be controlled along with the thermostat and PTAC unit.

Products


E3X-T02-U2W	E3T-C1AWH

Remote Entertainment Center Lighting

wireless controls for landscape lighting

ILLUMRA wiring diagrams

Application

Control lights in entertainment center from across the room.

Scenario

A homeowner purchased a new entertainment center and wanted to be able to control the lights in it from across the room. The lights in the entertainment center normally plug into an electrical outlet.

Solution

ILLUMRA self-powered wireless switches, and a plug-in dimmer/relay solved the problem and allowed the homeowner to control the mood lights in the entertainment center from several locations throughout the room, including the sofa. The plug in dimmer/relay was simply plugged into an outlet and the lights were plugged into it. The switches were attached to the surface of the walls, without cutting into them. A hand-held remote can be used from a seated position on the comfortable sofa. The system is compatible with dimmable bulbs and on/off fluorescent bulbs.

Products


E3T-S1AWH	E3T-S2AWH


E3T-S2HWH	E3R-D12GP-1

Wireless Room Temperature Sensor

This product is discontinued.

Thank You

Thank you for contacting us!

Where we go from here

A Sneak Peek: ILLUMRA Climate Controls

Wireless LED Under Cabinet Lighting

Application

Scenario

Solution

Products

Basic Wireless Light Switch Kit

Request a Quote form:

Log Home Wiring Wireless Switch

Log Home Wiring

Problem

Solution

Benefits

Products

Wireless Fan and Light Control

Application

Scenario

Solution

Products

Wireless Water Feature Control

Application

Scenario

Products

24VAC Wireless Thermostat

Request a Quote form:

Hotel Room HVAC Controls

Application

Scenario

Solution

Products

Remote Entertainment Center Lighting

Application

Scenario

Solution

Products