Zigbee Dimming Area Controller

Part Number


Request a Quote form:


0-10V 20A Wireless Zigbee Dimming Area Controller


The 0-10V 20A Zigbee Dimming Area Controller from ILLUMRA is compatible with the Zigbee 3.0 standard allows for dimming control of 20A of circuits. As part of a system, this controller establishes wireless control of room ambiance by dimming LED and fluorescent light fixtures. It can reduce energy consumption through the use of manual control, vacancy detection, daylighting, and load shedding strategies, enabled by wireless connections to accessories such as wireless motion sensors, light sensors, and switches. This controller provides a compelling, cost effective, minimally disruptive solution for compliance with the latest energy regulations.

Compatible with:

  • Any Zigbee 3.0 or HA 1.2 gateway
  • Zigbee 3.0 compatible devices

Area vs. Fixture Controller

The Zigbee Dimming Area Controller on this page features full 20A circuit switching capacity and may be used to control multiple fixtures over a larger area by daisy-chaining the 0-10V control signals between fixtures.

The 5A Zigbee Dimming Fixture Controller is optimized for use one per fixture to eliminate the need for adding control wiring between fixtures.

Specifications ZBX-DUV
Supply Voltage 100-277VAC  50 /60 Hz
Maximum Load: 20 Amps Resistive, Induction, Fluorescent, LED, Other
160A Max Inrush Current
0-10V sink 100mA (IEC Standard 60929 Annex E)
0-10V source 1mA (ANSI E1.3-2001 R2011)
Range 50-150 feet (typical)
Frequency 2.4GHz - Zigbee HA1.2
Dimensions: 2.11 x 1.73 x 1.09 inches (54 x 44 x 28 mm)
Operating Temperature: +32° to +122°F (0° to +50°C)
Storage Temperature: -4° to +176°F (-20° to +80°C)
UL 60730 (safety)
UL 2043 (plenum)
CSA c22.2#14-05 (safety)
CE – IEC 60730
IC ID: 8254A-ZICM357SP2

Wiring Diagrams

ZBX-DUV Wiring Diagram


  • Conference Rooms
  • Houses of Worship
  • Classrooms
  • Offices
  • Daylight harvesting
  • Load Shedding