Zigbee Dimming Fixture Controller

Part Number


Request a Quote form:

0-10V 5A Wireless Zigbee Dimming Fixture Controller


The 0-10V 5A Zigbee Dimming Fixture Controller from ILLUMRA is compatible with the Zigbee 3.0 standard allows for dimming control of individual fixtures. As part of a system, this controller establishes wireless control of room ambiance by dimming LED and fluorescent light fixtures. It can reduce energy consumption through the use of manual control, vacancy detection, daylighting, and load shedding strategies, enabled by wireless connections to accessories such as wireless motion sensors, light sensors, and switches. This controller provides a compelling, cost effective, minimally disruptive solution for compliance with the latest energy regulations.

Compatible with:

  • Any Zigbee 3.0 or HA 1.2 gateway
  • Zigbee 3.0 compatible devices

Fixture vs. Area Controller

The 5A Zigbee Dimming Fixture Controller on this page is optimized for use one per fixture to eliminate the need for adding control wiring between fixtures.

The Zigbee Dimming Area Controller features full 20A circuit switching capacity and may be used to control multiple fixtures over a larger area by daisy-chaining the 0-10V control signals between fixtures.


Specifications ZBX-DUV-FX
Supply Voltage 100-277VAC  50 /60 Hz
Maximum Load: 5 AMPs all loads; Induction, Fluorescent, LED, Other
  70A Max Inrush Current
  0-10V sink 100mA (IEC Standard 60929 Annex E) 
  0-10V source 1mA (ANSI E1.3-2001 R2011) 
Range 50-150 feet (typical)
Frequency 902MHz
Dimensions: 2.11 x 1.73 x 1.09 inches (54 x 44 x 28 mm)
Operating Temperature: +32° to +122°F (0° to +50°C)
Storage Temperature: -4° to +176°F (-20° to +80°C)
  UL 60730 (safety)
  UL 2043 (plenum)
  CSA c22.2#14-05 (safety)
  CE – IEC 60730
  IC ID: 8254A-ZICM357SP2


Wiring Diagrams

ZBX-DUV-FX wiring diagram


  • Conference Rooms
  • Houses of Worship
  • Classrooms
  • Offices
  • Daylight harvesting
  • Load Shedding