The BTX-D01-CCTFX is an Advanced Network Control for light fixtures that uses Bluetooth mesh communication for fixture to fixture grouping, wireless switch communication and mobile app-based commissioning. The Fixture sensor is perfect for automatic lighting control in low bay applications 7-15 ft (2.5-5m) Each unit supports 2 channels of 0-20V dimming for controlling tunable white fixtures. It also includes a light sensor for Daylight harvesting to minimize energy use when sufficient ambient light is available. Mobile apps for either iOS or Android allow configuration of operating parameters, grouping, and schedules. No gateway is needed as the Fixture Sensors communicate directly with the mobile app. The system uses encrypted communications with security credentials shared through QR Codes for either Admin or User access. No passwords, or web access is needed or supported. All configuration is performed with direct communication with the Fixture Sensor through the mobile app.
iOS and Android App based commissioning
Scene recall
Walk Test mode to confirm coverage area
12VDC powered - Use w/ Dim to Off driver with Aux power output
0-10V CCT dimming Advanced Network Control
High end trim - adjust maximum light level
Vacancy / Occupancy sensor to dim then turn off
Fixture Grouping with Bluetooth mesh wireless communication
Daylight harvesting
Scheduling - time based on/off or scene recall
Color Tuning
SPECIFICATIONS - BTX-D01-OCC
Power
Input Voltage: 12 DC 35mA, Standby power: 0.45W
Max Load
0-10V sink 20mA
No relay, requires Dim to Off driver
Motion Sensor
Mounting Height: 8-15 ft (2.5 - 5 m), Detection range: 48 ft max
Approvals
UL8750 Safety
FCC Part 15
Dimensions
2.91 x 1.02 x 0.87 in (74 x 26 x 22 mm)
Fixture Die Cut: 20.8 x 64.8mm
Environmental
-30 to ~131 ºF (-30 to +55ºC) Operating Temperature
IP20
