The 20A 0-10V Dimming Area Controller from ILLUMRA allows wireless control of room ambiance by dimming LED and fluorescent luminaries. The controller also reduces energy consumption and supports compliance with the latest energy regulations.
The controller is rated for switching full 20A circuits, allowing it to work in nearly any application.
Area vs. Fixture Controller
The Area Controller on this page features full 20A circuit switching capacity and may be used to control multiple fixtures over a larger area by daisy-chaining the 0-10V control signals between fixtures.
To control multiple fixtures without daisy-chaining 0-10V control wires, see the 5A 0-10V Dimming Fixture Controller, which is optimized for use one controller per fixture to eliminate the need for adding dimming control wiring between fixtures.
Specifications
E9X-DUV-10VTP
Supply Voltage
100-277 VAC 50 – 60Hz
Maximum Load:
20 Amps Resistive, Induction, Fluorescent, LED, Other
160A Max Inrush Current
0-10V sink 100mA (IEC Standard 60929 Annex E)
0-10V source 1mA (ANSI E1.3-2001 R2011)
Compatible Loads
Metal Halide; Sodium Vapour; LED; Induction; Fluorescent; Other
Range
50-150 feet (typical)
Frequency
902MHz EnOcean® Protocol
Dimensions
2.11 x 1.73 x 1.09 inches (54 x 44 x 28 mm)
Operating Temperature:
+32° to +122°F (0° to +50°C)
Storage Temperature:
-4° to +176°F (-20° to +80°C)
Memory Storage
20 links
Transmit EEP
A5-38-08
Approvals
UL 60730 (safety); UL 2043 (plenum); CSA c22.2#14-05 (safety); CE – IEC 60730; FCC: SZV-STM300U IC: 5713A-STM300U
