The ceiling-mounted High Ceiling Occupancy Sensor allows fine-tuned control of lights, temperature, and other loads by signaling when a space has been unoccupied for a set period of time. Because the sensor is wireless, there is no need to run additional wiring. Installation can be completed in a manner of minutes. The sensor is self-powered by harvesting energy from indoor light, eliminating the need for periodic battery changes. The clean, contemporary styling makes it an attractive addition to any decor. This device uses a passive infrared (PIR) sensor to detect motion. The occupancy sensor transmits RF signals to control lighting, HVAC, and outlet plug loads more efficiently. Use as part of a wireless control system to reduce energy consumption or to implement compliance with the latest energy regulations.
Specifications
E9T-OSH
Power Supply Optional
Indoor light energy harvesting (default); Supplemental battery (CR2032) or 2-wire connector for external power or remote solar cell (3-5VDC)
Frequency
902 MHz EnOcean RF transmitter
Transmission Range
160 ft. (50M)
Motion Detection Range
60 ft. (18m) diameter @ 33ft (10m) mounting height (refer to diagrams)
Startup Charge Times (from empty)
First Motion Transmission/Linking = 5 min @ 200 lux; Motion LED Blink Light/Walk Test = 1.5 hours @ 2000 lux
