Search Results for: NS0-303 Guaranteed Passing 🚦 NS0-303 Valid Test Topics ℹ NS0-303 Valid Exam Pattern ⭐ Search for ⏩ NS0-303 ⏪ and download exam materials for free through ➽ www.pdfvce.com 🢪 👯NS0-303 Reliable Exam Pdf

Total posts found - 82

Wiring Diagrams

  1. 120V 3-Wire Basic (E3R-R12-3HOBP)
  2. 120V 5-Wire Basic (E3R-R12-5IBBP)
  3. 120V Dual Source (E3R-R12-5IBBP)
  4. 120V Wired 3-Way (E3R-R12-5IBBP)
  5. 120V Wired 4-Way Switch (E3R-R12-5IBBP)
  6. 240V 3-Wire Basic (E3R-R24-3HOBP)
  7. 240V 5-Wire Basic (E3R-R24-5IBBP)
  8. 240V Dual Source (E3R-R24-5IBBP)
  9. 240V Wired 3-Way (E3R-R24-5IBBP)
  10. 277V 3-Wire Basic (E3R-R27-3HOBP)
  11. 277V 5-Wire Basic (E3R-R27-5IBBP)
  12. 277V Dual Source (E3R-R27-5IBBP)
  13. 277V Wired 3-Way (E3R-R27-5IBBP)
  14. 3 Phase Motor Controller Using LVRX-4 (E3R-R04FP-4)
  15. Classroom With Manual On-Off Auto Off Wired Sensor (E3X-MRCFP-13)
  16. Classroom With Manual On-Off Auto Off Wireless Sensor (E3R-R12-5IBBP)
  17. CUV Generator Disconnect (E3K-K11-WH)
  18. Four Zone Control (E3R-MICFP-04)
  19. Room Controller w/ Wired And Wireless Motion Sensors (E3X-MRCFP-13)
  20. Motorized Shade Or Screen High Voltage (E3R-MBCFP-02)
  21. Motorized Shade Or Screen Low Voltage (E3R-MBCFP-02)
  22. Wireless Switch Leg (E3K-K11-WH, E3K-L11-WH, E3K-M11-WH)
  23. Fan Or Motor Control (E3K-L11-WH)
  24. IWR EnOcean + ZigBee Long Range Remote Control — A (E3R-R04FP-4, XBX-CTRFP-44)
  25. IWR EnOcean + ZigBee Long Range Remote Control — B (E3R-R04FP-4, XBX-CTRFP-44)
  26. IWR EnOcean + ZigBee 3-way Long Range Remote Control (E3R-R04FP-4, XBX-CTRFP-44, E3R-R12-5IBBP)
  27. IWR EnOcean + ZigBee 3-way Control w/ Motion Sensor (E3R-R04FP-4, XBX-CTRFP-44, E3R-R12-5IBBP)
  28. IWR Egress Lights (EnOcean + ZigBee Long Range Remote Control)
  29. Hotel PTAC
  30. Dimmer PWM Hardwired 0-10V Control-1.pdf
  31. 4-CH CUV_Basic.pdf
  32. 4-CH CUV_General.pdf
  33. Conference Room Kit.pdf
  34. Daylighting_Central_Control.pdf
  35. Dimmer PWM with Hardwired 0-10V Control and Master.pdf
  36. Door Window HVAC.pdf
  37. ECO-Friendly Switch.pdf
  38. IWR Gate Motion.pdf
  39. IWR Gymnasium.pdf
  40. Hotel AC.pdf
  41. ILLUMRA Classroom.pdf
  42. ILLUMRA generic 10,000 square feet office lighting.pdf
  43. IWR Indoor Sports.pdf
  44. IWR 3-Way Independent.pdf
  45. IWR Long Range  3-Way Synch.pdf
  46. Key Card TSTAT.pdf
  47. Lighted Sign.pdf
  48. LVRX-4 ILLUMRA.pdf
  49. LVRX-8 ILLUMRA.pdf
  50. Dimmer 0-10V Wiring Diagram_Simple.pdf
  51. IWR Out Building.pdf
  52. Repeater.pdf
  53. CUV-TSTAT-PTAC Unit.pdf
  54. IWR Tennis Court.pdf
  55. Valve Actuator.pdf
  56. Wired Key Card Switch.pdf
  57. Occupancy Sensor Wireless Mesh.pdf
  58. IWR Outbuilding Light 3-Way Control
  59. Multiple Wired Dimmers

Policies

Acceptance of Orders/Terms

All ILLUMRA brand products (produced by Ad Hoc Electronics, LLC or “SUPPLIER”) are subject to acceptance by SUPPLIER. SUPPLIER reserves the right to reject any order. Possession of a price list does not constitute an offer to sell. Orders shall be initiated by Buyer issuing a Purchase Order or otherwise placing an order by electronic means acceptable to SUPPLIER. Orders shall identify the Products, unit quantities, part numbers, descriptions, applicable prices and requested delivery dates. Acceptance of any order by SUPPLIER is expressly conditioned on Customers’s assent to the terms and conditions set forth herein (“Terms”) and the waiver by Customer of any terms and conditions contained in any order form, confirmation, or any other communication of Customer, whether previously or hereafter delivered to SUPPLIER, which either add to, differ from, modify, conflict with, or are otherwise inconsistent with any term or condition herein. SUPPLIER hereby gives notice of its objection to any additional or different terms or conditions in any such order form, confirmation, or communication. Customer’s failure to object in writing to these terms prior to the earlier of Customer’s acceptance of the products ordered or fifteen (15) days after delivery thereof to Customer will constitute agreement by Customer to these Terms. SUPPLIER hereby gives notice of its objection to any additional or different terms or conditions in any such order form, confirmation or communication.

Hold for Release Orders

An order may be placed on a hold-for-release status. Prices are firm for 3 months from date of order acceptance. The price of all hold-for-release orders not released by Customer for immediate shipment within 3 months from the date of order acceptance will be increased up to 10% over initial order price to cover increased cost of labor and material. All hold-forrelease orders not released for immediate shipment within 6 months from the date of order acceptance may be cancelled by SUPPLIER and subject to a 25% cancellation charge based on the price of the order.

Product Changes

SUPPLIER reserves the right to discontinue the manufacture or sale of any product (“Supplier Product”) at any time or to alter, modify, or redesign the Supplier Products.

Prices

Prices are subject to change without notice. All prices are in U.S. Dollars. International payment terms are cash in advance or irrevocable, confirmed letter of credit, due at site. In the event of a price increase, all accepted orders on hand will be filled at lower prices provided such orders are released for shipping prior to the effective date of the price increase. If the orders are not released for shipment prior to the price increase, the orders will be billed at prices in effect at the time of shipment. (Special quoted orders that cannot be released for shipping prior to the price increase may be subject to an increase in price.) In the event any governmental action or request should prevent SUPPLIER from implementing any price or continuing any price already in effect, SUPPLIER may at its option cancel Customer’s order or any part thereof.

Taxes/Duties

All prices are exclusive of federal, state, or local sales, use or other taxes, as well as all duties, import fees or other assessments all of which are the responsibility of Customer.

Payment Terms/Credit Approval

Payment terms are Payment in Advance unless alternative payment terms have been arranged. If Customer is requesting terms, credit approval is required prior to any shipment. To qualify, buyer must complete application and be approved by SUPPLIER’S finance department. Please allow 2-3 weeks for processing. All invoices, whether partial or in full, shall be due and payable in full by Customer pursuant to the terms set forth thereon. Invoices not timely paid are subject to a late payment charge of 1.5% per month – 18% per year, or the maximum rate allowed by law, which interest charges shall accrue beginning on the invoice due date. If Customer becomes insolvent, files or has filed against it a petition in bankruptcy, makes any assignment for the benefit of creditors, or has a receiver or trustee appointed for it or its property; or takes action to liquidate or otherwise cease doing business as a going concern; or undergoes a change in ownership; or fails to provide adequate assurance or security for credit extended; or takes any other action that SUPPLIER determines in its sole discretion adversely impacts the conditions under which credit was extended, then all amounts outstanding from Customer hereunder shall at SUPPLIER’s option become immediately due and payable. ALL PAYMENTS, WHETHER UNDER THE STANDARD PAYMENT TERMS OR OTHERWISE, SHALL BE CONSIDERED RECEIVED BY SUPPLIER AS FOLLOWS: (1) FOR PAYMENTS BY CHECK, WHEN THE CHECK IS RECEIVED AT SUPPLIER’S DESIGNATED PAYMENT LOCATION, AND (2) FOR PAYMENTS BY ELECTRONIC FUNDS TRANSFER, THE BUSINESS DAY ON WHICH THE FUNDS ARE IMMEDIATELY AVAILABLE TO SUPPLIER. Customer shall pay all undisputed invoices regardless of any dispute that may exist as to other delivered or undelivered goods. With respect to any disputed invoice, Customer shall pay all amounts not in dispute. Customer expressly waives the right to assert any offset or counterclaim with respect to amounts due under any invoice issued by SUPPLIER hereunder.

Cancellation/Change Orders

Orders may only be revised or cancelled by Customer prior to the date of shipment and only with SUPPLIER’s prior consent. All cancelled orders shall be subject to a cancellation charge of 25% of the order price. If not cancelled as provided herein, Customer shall be liable for the full order price. If any amount due SUPPLIER is collected by, or attempted to be collected by, a third party collection agent, SUPPLIER shall be entitled to recover all collection expenses, including attorney’s fees.

Packaging/Shipping/Risk of Loss

Unless otherwise agreed by SUPPLIER in writing SUPPLIER shall select the method of shipment and carrier, and costs for shipping shall be billed to Customer in accordance with the carrier’s then current price list. Costs for special packaging and/or handling requested by Customer shall be the responsibility of Customer. The risk of loss, damage or shortage of SUPPLIER products shall pass to Customer upon delivery to the carrier regardless of notice to Customer. SUPPLIER assumes no responsibility for insuring shipment unless specifically agreed to in writing by SUPPLIER, in which case the cost of insurance shall be added to Customer’s account.

All Shipments

All items shipped are invoiced, including items shipped as part of warranty exchange. Exchanged items will have a credit memo issued, to be applied to the invoiced replacement parts, upon receipt of the defective items. Unless otherwise agreed, all shipments are F.O.B. SUPPLIER located in Orem, Utah. Title and “Risk of Loss” passes to purchaser upon delivery by SUPPLIER to the carrier. Purchaser has legal responsibility to file transportation claims for damage/shortage with the carrier. See TRANSPORTATION CLAIMS below. Customers ordering ILLUMRA products with a combined distributor price of $1,500 or more for one consignee and one release qualify for ground freight allowance. All ILLUMRA orders having a distributor price lower than these levels will be assessed freight and handling charges. A $10 adder will be applied on all drop shipment orders.

Freight Allowance

For orders that qualify for freight allowance, SUPPLIER reserves the right to select the carrier and to route shipments at its discretion. SUPPLIER will ship in the manner selected by the customer provided the customer assumes any additional transportation costs. For shipments outside the contiguous United States, consult SUPPLIER for applicable terms & conditions.

Transportation Claims

Any claims for damage, loss, or shortage should be filed by Customer with the respective transportation carrier in writing immediately upon receipt of the Supplier Products. In no event shall SUPPLIER be liable for damage or loss to a shipment caused by a carrier. If shortage exists with respect to any shipment and it is not concealed, Customer shall secure a notation of such shortage from the carrier on the freight bill or delivery receipt. If shortage is concealed, Customer must notify the carrier and SUPPLIER within 15 days. No claims for damage, loss, or shortage will be allowed unless they are accompanied by an inspection report or signed delivery receipt noting such damage, loss, or shortage signed by a representative of the carrier and forwarded to SUPPLIER within 30 days of the invoice date.

Return of Supplier Product

Customer may return new and unopened Supplier Product only with prior authorization by Supplier on a Returned Merchandise Authorization, with the exception of special order or custom products which are not returnable. Non-stocking customer will be charged a minimum restocking charge of 25% of the cost of the returned goods and shall be responsible for freight and duties to return the Supplier Product. Restocking charge may be waived for stocking customer assuming product is returned within 30 days from date of purchase.

Force Majeure

SUPPLIER shall not be liable for failure to fulfill its obligations herein or for delays in delivery due to causes beyond its reasonable control, including, but not limited to, acts of God, natural disasters, acts or omissions of other parties, acts or omissions of civil or military authority, Government priorities, changes in the law, material shortages, fire, strikes, floods, epidemics, quarantine restrictions, riots, war, acts of terrorism, delays in transportation or inability to obtain labor or materials through its regular sources. SUPPLIER’s time for performance of any such obligation shall be extended for the time period of such delay or SUPPLIER may, at its option, cancel any order or remaining part thereof without liability by giving notice of such cancellation to Buyer.

Limited Warranty

Products manufactured by the SUPPLIER are warranted against defects in materials and manufacturing under normal use in accordance with instructions and specifications published by the SUPPLIER, for a period of five (5) years from the date of purchase from the End User. In the event of a product failure due to materials or workmanship, SUPPLIER will repair or replace the defective product. For warranty service, return the defective product to SUPPLIER, shipping prepaid, for prompt repair or replacement. Products not manufactured by SUPPLIER are subject to the terms and conditions of the manufacturer’s warranty. The foregoing sets forth the full extent of SUPPLIER’s warranties regarding the Products. Repair or replacement at SUPPLIER’s option is the exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND SELLER SPECIFICALLY DISCLAIMS ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL SELLER, ITS SUPPLIERS OR LICENSORS BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS, OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE ANY PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. THEREFORE, THE FOREGOING EXCLUSIONS MAY NOT APPLY IN ALL CASES. This warranty provides specific legal rights. Other rights, which vary from state to state, may also apply.

Limitation of Liabilities

The foregoing limited warranty provides the purchaser’s sole and exclusive remedy relating to ILLUMRA products. The total liability of SUPPLIER on any and all claims of any kind, whether in contract, warranty, tort (including negligence), strict liability or otherwise, arising out of or in connection with, or resulting from, ILLUMRA product’s performance or breach of the foregoing limited warranty or from ILLUMRA sale, delivery, repair, or replacement of any products, or the furnishing of any services, shall in no event exceed the purchase price allocable to the specific product which gives rise to the claim and any and all such liability shall terminate upon the expiration of the limited warranty set forth above. IN NO EVENT SHALL SUPPLIER BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES WHETHER AS THE RESULT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE, STRICT LIABILITY, OR ANY OTHER THEORY).

Export Control

The sale, resale or other disposition or Products and any related technology or documentation are subject to the export control laws, regulations and orders of the United States and may be subject to the export and/or import control laws and regulations or other countries. Buyer agrees to comply with such laws, regulations and orders and agrees that it shall not directly or indirectly export any Products to any country to which such export or transmission is restricted or prohibited. Buyer acknowledges its responsibility to obtain any license to export, re-export or import as may be required.

Entire Agreement

The terms and conditions contained herein constitute the entire agreement between SUPPLIER and Customer and supersede any and all prior agreements, whether oral, written, or implied. No modification of these terms and conditions shall be effective unless made in writing and executed by SUPPLIER.

General

This agreement shall not be assigned by Customer without the prior written consent of SUPPLIER, and any assignment made without such consent shall be null and void. This agreement shall inure to the benefit of and be binding upon the parties hereto and their respective successors and permitted assigns. This agreement shall be governed by and construed in accordance with the laws of Orem, Utah, without giving effect to its conflicts of law provisions. Customer hereby expressly consents to the exclusive jurisdiction of the Utah courts to settle any disputes arising from these terms or the sale of Supplier Product to Customer.

Privacy Policy

This Privacy Policy describes how your personal information is collected, used, and shared when you visit or make a purchase from illumra.com (the “Site”).

PERSONAL INFORMATION WE COLLECT

When you visit the Site, we automatically collect certain information about your device, including information about your web browser, IP address, time zone, and some of the cookies that are installed on your device. Additionally, as you browse the Site, we collect information about the individual web pages or products that you view, what websites or search terms referred you to the Site, and information about how you interact with the Site. We refer to this automatically-collected information as “Device Information.”

This information helps us to make things easier for you to navigate our website every time you return.

We collect Device Information using the following technologies:

– “Cookies” are data files that are placed on your device or computer and often include an anonymous unique identifier. For more information about cookies, and how to disable cookies, visit http://www.allaboutcookies.org.
– “Log files” track actions occurring on the Site, and collect data including your IP address, browser type, Internet service provider, referring/exit pages, and date/time stamps.
– “Web beacons,” “tags,” and “pixels” are electronic files used to record information about how you browse the Site.

When we talk about “Personal Information” in this Privacy Policy, we are talking both about Device Information.

HOW DO WE USE YOUR PERSONAL INFORMATION?

Only for internal purposes and for purposes you opt into like email newsletters, etc.

We use the Device Information that we collect to help us screen for potential risk and fraud (in particular, your IP address), and more generally to improve and optimize our Site (for example, by generating analytics about how our customers browse and interact with the Site, and to assess the success of our marketing and advertising campaigns).

SHARING YOUR PERSONAL INFORMATION

We do not share or sale your Personal Information with third parties. We use Google Analytics to help us understand how our customers use the Site–you can read more about how Google uses your Personal Information here: https://www.google.com/intl/en/policies/privacy/. You can also opt-out of Google Analytics here: https://tools.google.com/dlpage/gaoptout.

Finally, we may also share your Personal Information to comply with applicable laws and regulations, to respond to a subpoena, search warrant or other lawful request for information we receive, or to otherwise protect our rights.

BEHAVIOURAL ADVERTISING
As described above, we use your Personal Information to provide you with targeted advertisements or marketing communications we believe may be of interest to you. For more information about how targeted advertising works, you can visit the Network Advertising Initiative’s (“NAI”) educational page at http://www.networkadvertising.org/understanding-online-advertising/how-does-it-work.

You can opt out of some of these services by visiting the Digital Advertising Alliance’s opt-out portal at: http://optout.aboutads.info/.

DO NOT TRACK
Please note that we do not alter our Site’s data collection and use practices when we see a Do Not Track signal from your browser.

YOUR RIGHTS
If you are a European resident, you have the right to access personal information we hold about you and to ask that your personal information be corrected, updated, or deleted. If you would like to exercise this right, please contact us through the contact information below.

CHANGES
We may update this privacy policy from time to time in order to reflect, for example, changes to our practices or for other operational, legal or regulatory reasons.

CONTACT US
For more information about our privacy practices, if you have questions, or if you would like to make a complaint, please contact us by e-mail at [email protected] or by mail using the details provided below:

115 South State Street, Suite B, Lindon, UT, 84042, United States

illumra.com

ILLUMRA Terms and Conditions (PDF): Click here to download.

Training

Videos

 

 

Estimator and Contractor Guides

Conference Room Control System

All you need to know to implement an energy saving; customized ILLUMRA conference room control system without running any switch leg wires. Download PDF

 

 

 

Classroom Control System (w/Wired Occupancy Sensor)

Optimize the learning environment for learning and for energy savings. Do it in less than 1 hour and 30 minutes. Download PDF

 

 

 

Classroom Control System (w/Wireless Occupancy Sensor)

Optimize the learning environment for learning and for energy savings. Download PDF

 

 

 

3-wire / 5-wire Relay Receiver

4/8 Channel Low Voltage Relay Receiver

Learn how to wire and program a relay receiver for basic lighting and 3-way wireless light switches for 120 V and 240V loads. Download PDF

 

 

 

Learn how to wire and program an ILLUMRA low voltage relay receiver. Download PDF

Training

Videos

 

 

 

Estimator and Contractor Guides

Conference Room Control System

All you need to know to implement an energy saving; customized ILLUMRA conference room control system without running any switch leg wires. Download PDF

 

 

 

Classroom Control System (w/Wired Occupancy Sensor)

Optimize the learning environment for learning and for energy savings. Do it in less than 1 hour and 30 minutes. Download PDF

 

 

 

Classroom Control System (w/Wireless Occupancy Sensor)

Optimize the learning environment for learning and for energy savings. Do it in about 1 hour. Download PDF

 

 

 

 

3-wire / 5-wire Relay Receiver

4/8 Channel Low Voltage Relay Receiver

Learn how to wire and program a relay receiver for basic lighting and 3-way wireless light switches for 120 V and 240V loads. Download PDF

 

 

 

Learn how to wire and program an ILLUMRA low voltage relay receiver. Download PDF

Search Results

[wp_google_search]

ILLUMRA Privacy Policy

This Privacy Policy describes how your personal information is collected, used, and shared when you visit or make a purchase from illumra.com (the “Site”).

PERSONAL INFORMATION WE COLLECT

When you visit the Site, we automatically collect certain information about your device, including information about your web browser, IP address, time zone, and some of the cookies that are installed on your device. Additionally, as you browse the Site, we collect information about the individual web pages or products that you view, what websites or search terms referred you to the Site, and information about how you interact with the Site. We refer to this automatically-collected information as “Device Information.”

This information helps us to make things easier for you to navigate our website every time you return.

We collect Device Information using the following technologies:

– “Cookies” are data files that are placed on your device or computer and often include an anonymous unique identifier. For more information about cookies, and how to disable cookies, visit http://www.allaboutcookies.org.
– “Log files” track actions occurring on the Site, and collect data including your IP address, browser type, Internet service provider, referring/exit pages, and date/time stamps.
– “Web beacons,” “tags,” and “pixels” are electronic files used to record information about how you browse the Site.

When we talk about “Personal Information” in this Privacy Policy, we are talking both about Device Information.

HOW DO WE USE YOUR PERSONAL INFORMATION?

Only for internal purposes and for purposes you opt into like email newsletters, etc.

We use the Device Information that we collect to help us screen for potential risk and fraud (in particular, your IP address), and more generally to improve and optimize our Site (for example, by generating analytics about how our customers browse and interact with the Site, and to assess the success of our marketing and advertising campaigns).

SHARING YOUR PERSONAL INFORMATION

We do not share or sale your Personal Information with third parties. We use Google Analytics to help us understand how our customers use the Site–you can read more about how Google uses your Personal Information here: https://www.google.com/intl/en/policies/privacy/. You can also opt-out of Google Analytics here: https://tools.google.com/dlpage/gaoptout.

Finally, we may also share your Personal Information to comply with applicable laws and regulations, to respond to a subpoena, search warrant or other lawful request for information we receive, or to otherwise protect our rights.

BEHAVIOURAL ADVERTISING
As described above, we use your Personal Information to provide you with targeted advertisements or marketing communications we believe may be of interest to you. For more information about how targeted advertising works, you can visit the Network Advertising Initiative’s (“NAI”) educational page at http://www.networkadvertising.org/understanding-online-advertising/how-does-it-work.

You can opt out of some of these services by visiting the Digital Advertising Alliance’s opt-out portal at: http://optout.aboutads.info/.

DO NOT TRACK
Please note that we do not alter our Site’s data collection and use practices when we see a Do Not Track signal from your browser.

YOUR RIGHTS
If you are a European resident, you have the right to access personal information we hold about you and to ask that your personal information be corrected, updated, or deleted. If you would like to exercise this right, please contact us through the contact information below.

CHANGES
We may update this privacy policy from time to time in order to reflect, for example, changes to our practices or for other operational, legal or regulatory reasons.

CONTACT US
For more information about our privacy practices, if you have questions, or if you would like to make a complaint, please contact us by e-mail at [email protected] or by mail using the details provided below:

115 South State Street, Suite B, Lindon, UT, 84042, United States

illumra.com

Green Solutions

Energy Code Compliance

ILLUMRA products facilitate compliance with California Title 24 and ASHRAE 90.1 Daylighting and motion sensors are designed to save energy by turning down lights automatically.

The Salt Lake City International Center office building implemented required motion sensors using ILLUMRA products.

Material Savings

ILLUMRA Self-powered Wireless Controls are environmentally friendly because they reduce the amount of materials used during electrical installations for renovations and new construction.

ILLUMRA reduces the need for the following materials:

  • copper wire
  • dry wall
  • switch boxes
  • conduit

The controls operate without batteries, thus saving the materials, energy, and waste from battery manufacturing and disposal. Material savings is an important part of completing a green electrical installation and self-powered wireless controls help to accomplish that goal.

A common electrical project where materials can be reduced is installing a new light switch in an existing home or building. In the past, a job like this required fishing wires through the wall, installing conduit, or tearing a hole into the wall and fixing the hole afterwards. All of these techniques require extra materials, special tools and time; all of this can be avoided through the use of self-powered wireless technology.

Energy Savings

Wireless controls can be placed virtually anywhere and control any device that is within range. This flexibility opens up the opportunity for energy savings that was not available in the past.

To accomplish energy savings in an existing home or building, a system of self-powered wireless controls can be installed to decrease the amount of energy used from lights, HVAC units, and devices that draw standby power.

Self-powered wireless motion sensors can be used to turn lights and other devices off when a room is unoccupied. Self-powered wireless temperature sensors can be used to set heating or air conditioning to an "economy" setting. A master switch can be used to stop current from entering devices that draw standby power and easily ensure lights, fans, and other devices are off when exiting.

Whatever the application, ILLUMRA Self-powered Wireless Controls make it easy to implement a cost-saving energy mangement system.

Energy Code Compliance

Green Solutions

 

[box]

Energy Code Compliance

[/box]

ILLUMRA products facilitate compliance with California Title 24 and ASHRAE 90.1 Daylighting and motion sensors are designed to save energy by turning down lights automatically.

The Salt Lake City International Center office building implemented required motion sensors using ILLUMRA products.

 

[box]

Material Savings

[/box]
ILLUMRA Self-powered Wireless Controls are environmentally friendly because they reduce the amount of materials used during electrical installations for renovations and new construction.

ILLUMRA reduces the need for the following materials:

  • copper wire
  • dry wall
  • switch boxes
  • conduit

The controls operate without batteries, thus saving the materials, energy, and waste from battery manufacturing and disposal. Material savings is an important part of completing a green electrical installation and self-powered wireless controls help to accomplish that goal.

A common electrical project where materials can be reduced is installing a new light switch in an existing home or building. In the past, a job like this required fishing wires through the wall, installing conduit, or tearing a hole into the wall and fixing the hole afterwards. All of these techniques require extra materials, special tools and time; all of this can be avoided through the use of self-powered wireless technology.
[box]

Energy Savings

[/box]
Wireless controls can be placed virtually anywhere and control any device that is within range. This flexibility opens up the opportunity for energy savings that was not available in the past.

To accomplish energy savings in an existing home or building, a system of self-powered wireless controls can be installed to decrease the amount of energy used from lights, HVAC units, and devices that draw standby power.

Self-powered wireless motion sensors can be used to turn lights and other devices off when a room is unoccupied. Self-powered wireless temperature sensors can be used to set heating or air conditioning to an “economy” setting. A master switch can be used to stop current from entering devices that draw standby power and easily ensure lights, fans, and other devices are off when exiting.

Whatever the application, ILLUMRA Self-powered Wireless Controls make it easy to implement a cost-saving energy mangement system.

ILLUMRA– a New Line of Energy Saving Controls

Orem, UT, April 30, 2008 — ILLUMRA Self-powered Wireless Controls announced today a new line of self-powered wireless controls that reduce the amount of time and materials needed to install energy management systems in green buildings. Based on EnOcean technology, the new ILLUMRA™ product line will include wireless light switches, temperature sensors, occupancy sensors and light sensors that are powered using solar or mechanical energy sources. These battery-free transmitters communicate with room and building controllers to conserve energy through occupancy sensing, daylight harvesting and personal workspace control technologies.

Green buildings minimize energy waste by switching off lights and reducing air conditioning demands in unoccupied spaces; reducing artificial light levels when natural light is available; and allowing building occupants to customize lighting and temperature preferences at individual workspaces. Implementing these technologies enhances productivity and saves on long term costs but traditionally requires extra wiring and time for installation. ILLUMRA self-powered wireless controls provide solutions for energy efficient buildings while requiring substantially less time and materials to perform the installation. Because the EnOcean based transmitters do not use batteries, the system offers maintenance-free, long-term operation.

ILLUMRA products do not require wiring from the transmitter to the controlled device, allowing the switches and sensors to be installed anywhere. Wireless light switches and sensors mount directly to walls or other surfaces and can be relocated easily. The receiver modules plug into outlets or can be hard-wired to the devices they control.

The ILLUMRA wireless light switch uses a small micro-generator to convert each switch press into a small amount of electricity that powers a built-in transmitter. ILLUMRA sensors harvest energy through a small solar cell which collects energy from ambient light.

Electrical-equipment distributors across the U.S. stock products by ILLUMRA Self-powered Wireless Controls. To find a distributor location near you, please visit the ILLUMRA distributor map by clicking here: ILLUMRA distributor map.

About ILLUMRA

ILLUMRA is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol, the de facto standard for energy-harvesting wireless controls. EnOcean technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or temperature differentials in the environment provide power to ILLUMRA transmitters, providing zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information, please explore www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

Super-strength Relays Expand Abilities of ILLUMRA Self-powered Wireless Light Controls

ILLUMRA, the largest North American supplier of self-powered, battery-free, wireless lighting control, announced today the release of four powerful new switching relays. The devices are used in conjunction with EnOcean-enabled self-powered wireless light switches to provide maintenance free, reliable, and reconfigurable lighting control and energy management solutions. With an increased range and load capacity, the new ILLUMRA relays allow installers to experience the simplicity of advanced ILLUMRA controls in a greater number of applications.

Installers can now use battery-free wireless light switches to control electrical loads up to 1500W (120V) or 3000W (240V). Additionally, users can now control lights from 150 feet away with high reliability. “The new ILLUMRA relays have been eagerly anticipated by our growing network of customers, distributors, and sales representatives in the commercial sector,” said Jan Finlinson, Vice President of ILLUMRA. “The increased power ratings, longer range wireless capability, 3-way switching and motor load control make these products extremely valuable to the wireless lighting control and energy management industry.”

Buildings that use ILLUMRA products potentially qualify for LEED credits and Energy-Star ratings. Such buildings require fewer materials and less labor during installation, and have the ability to use less energy. The new ILLUMRA relay receivers are ideal for use in commercial office spaces, warehouses, conference rooms, hospitals, entertainment venues, and other commercial/industrial applications. The devices have also been integrated directly into lighting fixtures by manufacturers, resulting in fixtures delivered to the job-site with ILLUMRA wireless controls built-in.

The new relays are available in three-wire and five-wire versions and are normally installed in an electrical junction box, fixture, or wiring cavity. The three-wire relay provides quick and easy basic wireless control while the five-wire relay provides more flexibility during installation and has a larger load rating, including motor loads. Each ILLUMRA relay receiver can respond to as many as 30 unique switches and/or sensors. Programming a receiver to respond to the unique ID of any transmitter can be done in a few seconds. The switches and sensors that control the relays are normally installed after the walls, furniture, and equipment have been installed in the space, simplifying electrical planning.

About ILLUMRA

ILLUMRA is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol, the de facto standard for energy-harvesting wireless controls. EnOcean technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or other ambient energy in the environment provides power to ILLUMRA transmitters, providing zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information, please explore www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

Boyd’s Test Page

[one_third]
wireless controls for landscape lighting

ILLUMRA wiring diagrams

120V 3 wire Basic Wiring Diagram (E9X-R12-3HOTP)

120V 3 Wire 3 Way Wiring Diagram(E9X-R12-3HOTP)[/one_third][two_third_last]

[box]

Application

[/box]
Yacht to Dock lighting
[box]

Scenario

[/box]
The Yacht owner wants to turn on the Dock lights from his Yacht while on approach.   Yacht to Dock lighting will make departures and arrivals at night easier and safer
[box]

Solution

[/box]

Yacht to Dock lighting was achieved with a ILLUMRA wire-in relay connecting to the light fixtures on the dock. ILLUMRA self-powered wireless light switches were installed in the yacht and an ILLUMRA self-powered, hand-held wireless remote control was located at the helm, permitting the captain or the occupants of the ship to safely control the lights while aboard.

 

[box]

Products

[/box]

ILLUMRA Self-powered Wireless Light Switch 3-wire receiver for wireless light switch I_ExT-S2HWH-1 I_ExT-S2HBK-1
ExT-S1xxx ExX-R12-3HOTP ExT-S2Hxx / ExT-S2Hxx

x – (3) 315 Mhz  (9) 902 MHz
[table “” not found /]

[table “” not found /]

[/two_third_last]

12 Week Project Finished in 15 Days Using ILLUMRA

ILLUMRA products were used in an “unprecedented industry move” as part of a 10,000 sq. ft. office build-out in Boston, MA. The project was named “15 days”, because it was completed in that short amount of time. It was sponsored by Commodore Builders, Leggat McCall Properties, and Audrey O’Hagen Architects, who issued the following press release about the project.

View the 15 Days press release here.

ILLUMRA products were selected as the flexible lighting control system in the build-out blitz. During Day 12, the ILLUMRA wireless switching system was quickly and easily installed, saving money in both labor and materials. A short video clip can be viewed at the following link by clicking on “Daily Archives” then click on “Day 12”, where Karl Neubauer, Senior Project Manager for Leggat McCall Properties, explains the benefits of the ILLUMRA wireless switches.

ILLUMRA’s flexibility allows the office space to change without getting in the way. In fact, ILLUMRA systems can grow and change as needs in the space evolve. For example, the light switches can be moved to new locations in a matter of minutes. New switches can be added. Existing switches can be assigned to control different light fixtures. Temperature, motion, and light sensors can control the lights, shades and/or HVAC system. Because they never require batteries to operate, ILLUMRA switches are literally maintenance-free. “ILLUMRA wireless control products are changing the way architects, specifiers, interior designers, lighting designers, and builders approach projects. Workspace personalization and office reconfiguration become more practical and affordable, and last-minute changes to wall configurations are no longer a cause for project delays,” says Jan Finlinson, Vice President of ILLUMRA.

ILLUMRA products provide ongoing savings because they can intelligently save energy through the use of wireless sensors. ILLUMRA products are also compatible with a wide variety of commonly available wired sensors from almost any manufacturer.

ILLUMRA products also qualify buildings in which they are used for LEED credits. In 1998 the Leadership in Energy and Environmental Design (LEED) Green Building Rating System was developed. Green buildings are healthier, more environmentally responsible, more energy efficient, and more profitable to operate. ILLUMRA products helped the “15 day” project to achieve a GOLD rating in the LEED Green Building Rating System.

For more information about ILLUMRA products, please explore www.ILLUMRA.com

About ILLUMRA

ILLUMRA is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems and is member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol, the de facto standard for energy-harvesting wireless controls. The technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or other ambient energy in the environment provide power to ILLUMRA transmitters, providing zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information visit www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

ILLUMRA SLT Wireless Sensor Extends Reach Of Control

ILLUMRA, the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, announced today the release of their SLT (Switch Leg Transmitter) wireless sensor. The SLT wireless sensor is used to extend the control of one branch circuit to other branch circuits without installing wires between them. The SLT wireless sensor connects to an existing switched load and transmits a control signal to an ILLUMRA wireless receiver, which in turn, switches a distant load. The distant load follows the existing load with both loads turning on and off simultaneously.

The SLT wireless sensor is compatible with existing ILLUMRA wireless receivers. As with all ILLUMRA wireless devices, the SLT wireless sensor is easy to install and easy to use. The new sensor reduces cost by eliminating expensive materials and eliminating tedious and time-consuming labor. The SLT wireless sensor can control an unlimited number of ILLUMRA wireless receivers as long as they are within 150 feet of the SLT wireless sensor. Each ILLUMRA wireless receiver can respond to as many as 30 different SLT wireless sensors. “The introduction of the SLT wireless sensor to the ILLUMRA line increases the flexibility of the entire line”, explained Jan Finlinson, Vice President at ILLUMRA. “Successful companies are always looking for ways to increase efficiency, reduce costs, and save energy, which is why ILLUMRA is gaining so much momentum in our industry. Our customers are finding more and more ways to apply ILLUMRA controls. With the SLT wireless sensor, the possibilities are vast, indeed”, said Finlinson.

As lighting circuits are added to a building, integration with existing control systems may be costly, complex, and/or impractical. With the SLT wireless sensor, the action of the existing lighting control can be duplicated on the new lighting circuit. For example, when task lights are added to work surfaces in an industrial manufacturing facility, the control circuits from the existing lighting systems are not available at floor level, but power is already wired to the bench-top. Installation of a SLT wireless sensor at an existing controlled load will transmit a signal to ILLUMRA wireless relay receivers installed at the bench-top, avoiding wasted energy due to task lights left on unnecessarily.

Buildings using the SLT wireless sensor and other ILLUMRA products: qualify for LEED credits, may qualify for Energy-Star ratings, require fewer materials and less labor during installation, and have the ability to use less energy. The SLT wireless sensor is manufactured to the latest quality standards in an ISO 9001:2000 facility, is RoHS compliant, is FCC and IC approved, has earned safety approval listing status according to applicable UL and CSA standards, and bears the ETL safety listing mark.

About ILLUMRA

ILLUMRA is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol, the de facto standard for energy-harvesting wireless controls. EnOcean technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or temperature differentials in the environment provide power to ILLUMRA transmitters, providing zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information, please explore www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

ZigBee Light Switch by ILLUMRA

ILLUMRA Offers World’s First ZigBee Rocker-Style Self-Powered Wireless Light Switch

Lighting Manufacturers Can Now Provide a Physical Switch to Control Smart Light Bulbs and Lighting Systems with Battery-Free and Reliable Self-Powered Switches

 

Las Vegas, NV (CES), January 7, 2016 – ILLUMRA is expanding its lineup of proven Self-Powered Wireless Switch options to include support for ZigBee, all designed to support battery-less and wire-free installation in residential and commercial smart buildings.

ILLUMRA’s ZigBee Switch provides users wireless control of their lighting and automation systems, faster installation, and lower maintenance costs using battery-free energy-harvesting technology compatible with ZigBee Green Power. The energy harvesting mechanism is powered by the motion of the user pressing the switch and is designed to operate maintenance-free for 20+ years. Their switches have been shipping to the marketplace for over 10 years powering ILLUMRA’s EnOcean compatible product line.

The Self-Powered ZigBee Switch is available to OEM companies for control of LED light bulbs, dimmers, and lighting control systems, and is available with custom branding options.

The Self-Powered Wireless Light Switch with ZigBee Green Power creates new opportunities for wireless controls:

  • Install a switch anywhere in a room––no wiring required
  • Control ZigBee compatible lights, thermostats, and other wireless devices
  • Transmit data on both the switch press and release to support both on/off and dimming controls
  • ZigBee Green Power and ZigBee 3.0 compatible

Featured-White-Light-Switch“Until now, ZigBee controls required either smartphone apps, or battery or line power,” said Jan Finlinson, President of ILLUMRA. “We are excited to offer the proven Self-Powered Wireless Switch technology to ZigBee OEMs to enable flexible switch placement, no new wires, and no maintenance to simplify installation.”

“ILLUMRA has been providing reliable control solutions for 10 years,” explained Jim O’Callahan, President of EnOcean, Inc. “Their proven expertise and track record of delivering innovative building control solutions will accelerate the adoption of the EnOcean energy-harvesting technology within the ZigBee community.”

The ZigBee Switch can communicate with globally-compliant ZigBee solutions that accept the Green Power feature. Our wireless engineering partner Constellation Labs is available to help OEM’s with integration.

The ZigBee Self-Powered Wireless Light Switch is compatible with standard rocker-style faceplates. Products will be available in a variety of colors for qualifying OEM’s in Q1 2016.

With the market’s increasing focus on energy conservation, it’s time to become a part of the wireless control movement that uses automation and power-saving technologies to reduce energy consumption. Purchase units here.

ZigBee® is a registered trademark of the ZigBee Alliance.

Download this press release.

Go to the press page.

ZigBee Light Switch by ILLUMRA

ILLUMRA Offers World’s First ZigBee Rocker-Style Self-Powered Wireless Light Switch

Lighting Manufacturers Can Now Provide a Physical Switch to Control Smart Light Bulbs and Lighting Systems with Battery-Free and Reliable Self-Powered Switches

 

Las Vegas, NV (CES), January 7, 2016 – ILLUMRA is expanding its lineup of proven Self-Powered Wireless Switch options to include support for ZigBee, all designed to support battery-less and wire-free installation in residential and commercial smart buildings.

ILLUMRA’s ZigBee Switch provides users wireless control of their lighting and automation systems, faster installation, and lower maintenance costs using battery-free energy-harvesting technology compatible with ZigBee Green Power. The energy harvesting mechanism is powered by the motion of the user pressing the switch and is designed to operate maintenance-free for 20+ years. Their switches have been shipping to the marketplace for over 10 years powering ILLUMRA’s EnOcean compatible product line.

The Self-Powered ZigBee Switch is available to OEM companies for control of LED light bulbs, dimmers, and lighting control systems, and is available with custom branding options.

The Self-Powered Wireless Light Switch with ZigBee Green Power creates new opportunities for wireless controls:

  • Install a switch anywhere in a room––no wiring required
  • Control ZigBee compatible lights, thermostats, and other wireless devices
  • Transmit data on both the switch press and release to support both on/off and dimming controls
  • ZigBee Green Power and ZigBee 3.0 compatible

“Until now, ZigBee controls required either smartphone apps, or battery or line power,” said Jan Finlinson, President of ILLUMRA. “We are excited to offer the proven Self-Powered Wireless Switch technology to ZigBee OEMs to enable flexible switch placement, no new wires, and no maintenance to simplify installation.”

“ILLUMRA has been providing reliable control solutions for 10 years,” explained Jim O’Callahan, President of EnOcean, Inc. “Their proven expertise and track record of delivering innovative building control solutions will accelerate the adoption of the EnOcean energy-harvesting technology within the ZigBee community.”

The ZigBee Switch can communicate with globally-compliant ZigBee solutions that accept the Green Power feature. Our wireless engineering partner Constellation Labs is available to help OEM’s with integration.

The ZigBee Self-Powered Wireless Light Switch is compatible with standard rocker-style faceplates. Products will be available in a variety of colors for qualifying OEM’s in Q1 2016.

With the market’s increasing focus on energy conservation, it’s time to become a part of the wireless control movement that uses automation and power-saving technologies to reduce energy consumption. Sign up for early units here.

ZigBee® is a registered trademark of the ZigBee Alliance.

Download this press release.

Go to the press page.

ILLUMRA Extends Range With EnOcean + ZigBee Hybrid System

ILLUMRA, the largest North American supplier of self-powered, battery-free, wireless lighting control systems, has announced its newest product innovation. The EnOcean + ZigBee long-range remote control system provides users with reliable light control at distances up to a mile away. The new long range hybrid system enables ILLUMRA self-powered wireless light controls to be used in a greater number of applications than was previously possible.

The ILLUMRA hybrid control system combines benefits of ZigBee 802.15.4 Industrial Wireless Relays (IWR) with the benefits of EnOcean compatible ILLUMRA Self-powered Wireless Controls. ILLUMRA wireless systems allow users to control electrical loads 150 feet away; the EnOcean + ZigBee hybrid system extends that range up to 1 mile. The system is made up of two component groups: first, an IWR pair designed to provide simple long-range remote control; and second, ILLUMRA battery-free wireless light switches and sensors, which are designed to provide easy-to-install light control and energy management systems. Together, these products make up the ILLUMRA hybrid system which provides simple, customizable, long range wireless light control, security control, pump station control, electronic sign control, traffic control, factory automation, and more. The hybrid system is especially effective for controlling loads across large open spaces where it would be preferable to not run wire. Examples of such applications include: barns, guest-houses, sports stadiums, tennis courts, boat-houses and garages.

The ILLUMRA hybrid system provides wireless remote control up to 1 mile away without the use of repeaters. The hybrid system uses ILLUMRA battery-free wireless light switches to produce a wireless signal. An ILLUMRA Low Voltage Relay Receiver that is connected to an Industrial Wireless Relay picks up the signal; the IWR then broadcasts the signal up to 1 mile away in all horizontal directions. A separate IWR connected to as many as four external relays, each sized for the load, receives the signal and controls attached electrical loads. The hybrid system may be used in 3-way switch applications by connecting ILLUMRA 5-wire Relay Receivers between the external relays and electrical loads.

ILLUMRA is excited about the opportunities the new hybrid system will open up to its customers. Contractors, specifiers, or other individuals can purchase components to create EnOcean + ZigBee long range remote control systems through ILLUMRA manufacturer’s sales representatives or from ILLUMRA distributors. To find the representative or distributor nearest you, please contact the ILLUMRA sales department at 801-349-1200.

About ILLUMRA

ILLUMRA is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol, the de facto standard for energy-harvesting wireless controls. EnOcean technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or temperature differentials in the environment provide power to ILLUMRA transmitters, providing zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information, please explore www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

CUV Control Transmitter

Part Number

E9X-CUV

Request a Quote form:

Description

The CUV Control Transmitter is the ILLUMRA method to wirelessly bridge control from one circuit to another.  The CUV Control Transmitter monitors any line voltage circuit and broadcasts the status to wirelessly control one or more circuits connected to compatible controllers.

Specifications E9X-CUV
Supply voltage 100-277 VAC 50 /60 Hz 0.5W standby power
Radio Frequency 902MHz
Radio Range 50-150 feet (17-50m)
Dimensions 2.11 x 1.73 x 1.09 inches (54 x 44 x 28 mm)
Operating Temperature +32° to +122°F (0 to +50°C)
Storage Temperature -4° to +176°F (-20° to +80°C)
Approvals UL60730 (Safety) | UL2043 (plenum) | CSA c22.2#14-05 (safety) | CE – IEC60730 | FCC: SZV-STM300U | IC: 5713A-STM300U

Downloads

Applications

Wiring Diagrams

ZigBee Devices

Cortet Certified products work directly with the Cortet Lighting Control System, 

a powerful and intelligent IoT-enabled wireless control platform by CEL.

 

LIGHTING CONTROLLERS

 

Specifications
  Dimming Area Controller  Dimming Fixture Controller On/Off Area Controller On/Off Fixture Controller
 
Part Number ZCX-DUV  ZCX-DUV-FX  ZCX-RUV ZCX-RUV-FX
Datasheet Download Download Download Download
Supply Voltage 100-277 VAC 50/60 Hz
Max Load 20 Amps Resistive, Induction, Fluorescent, LED, Other
160A Max Inrush Current
0-10V sink 100mA
0-10V source 1mA		  5 Amps all loads, Induction, Fluorescent, LED, Other
70A Max Inrush Current
0-10V sink 100mA
0-10V source 1mA		 20 Amps Resistive, Induction, Fluorescent, LED, Other
160A Max Inrush Current

 5 Amps all loads, Induction, Fluorescent, LED, Other
70A Max Inrush Current
Range 50-150 feet (typical)
Frequency 902MHz
Dimensions 2.61 x 1.73 x 1.09 (66 x 44 x 28 mm)
Operating Temperature +32 to +122 ºF (0 to +50ºC)
Storage Temperature -4 to +176 ºF (-20 to +80 ºC)
Approvals UL 60730 (safety) UL 2043 (plenum)
CSA c22.2#14-05 (safety) CE - IEC 60730
FCC ID W7Z-ZICM357SP2
IC ID: 8254A-ZICM357SP2

ILLUMRA Announces Partnership with EPA’s ENERGY STAR® Program

ILLUMRA Self-powered Wireless Controls announced today a fundamental commitment to protect the environment by becoming an ENERGY STAR partner. ILLUMRA, through its voluntary partnership with the U.S. Environmental Protection Agency’s ENERGY STAR Program, will work to improve energy efficiency and sustain green initiatives. ILLUMRA offers a complete line of self-powered, wireless controls, including switches and occupancy sensors. Utilizing energy harvesting technology, ILLUMRA makes installation eco-friendly by eliminating additional wiring, battery waste, and unnecessary finish work.

ILLUMRA provides wireless controls that install quickly, making it simple to implement energy saving control systems in hospitality buildings, schools, and other commercial buildings. ILLUMRA believes that strategic energy management systems will help enhance the financial health of businesses and organizations and aid in preserving the environment for future generations.

“ILLUMRA is committed to protecting our environment and this partnership with Energy Star illustrates this commitment to specifiers, contractors, and building owners,” said Colby Gibson, Sales and Marketing Manager for ILLUMRA. “ILLUMRA products make otherwise inefficient new and existing buildings energy efficient which increases profitability.”

In partnership with ENERGY STAR, ILLUMRA will:

  • Develop and implement plans consistent with the ENERGY STAR Energy Management Guidelines to achieve energy savings;
  • Help spread the word about the importance of energy efficiency to our staff and community;
  • Support the ENERGY STAR Challenge, a national call-to-action to help improve the energy efficiency of America’s commercial and industrial buildings by 10 percent or more;
  • Highlight our achievements with recognition offered through ENERGY STAR

 

“Environmental responsibility is everyone’s responsibility – and today I’m pleased ILLUMRA Self-powered Wireless Controls is taking this motto to heart,” said EPA Administrator Stephen L. Johnson. “By making smart energy choices, ILLUMRA is helping improve our nation’s energy and environmental outlook.”

About ENERGY STAR

ENERGY STAR was introduced by EPA in 1992 as a voluntary, market-based partnership to reduce greenhouse gas emissions through energy efficiency. Today, the ENERGY STAR label can be found on more than 50 different kinds of products, new homes and commercial and industrial buildings. Products and buildings that have earned the ENERGY STAR designation prevent greenhouse gas emissions by meeting strict energy-efficiency specifications set by the government. In 2007, Americans, with the help of ENERGY STAR, saved about $16 billion on their energy bills while reducing the greenhouse gas emissions equivalent to those of 27 million vehicles.

For more information about ENERGY STAR, visit www.energystar.gov or call toll-free 1-888-STAR-YES

About ILLUMRA

ILLUMRA Self-powered Wireless Controls is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. All ILLUMRA products operate using the EnOcean protocol, thede facto standard for energy-harvesting wireless controls. EnOcean technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or other ambient energy in the environment provide power to ILLUMRA transmitters, providing zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information about ILLUMRA, please explore www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

Bluetooth Light Switch by ILLUMRA

ILLUMRA Offers Self-Powered Bluetooth Wireless Light Switch

Bluetooth Lighting Switches Provide a Wireless, Battery-Free Physical Switch to Control Smart Light Bulbs

 

San Diego, CA (LFI), April 26, 2016 – ILLUMRA is expanding its lineup of proven Self-Powered Wireless Switch options to include support for Bluetooth wireless technology, designed for battery-less and wire-free installation in residential and commercial smart buildings. The Bluetooth switch joins the ILLUMRA product family of ZigBee® and EnOcean compatible products.

ILLUMRA’s Bluetooth Switch, leveraging EnOcean energy-harvesting technology, provides users wireless control of their lighting and automation systems, faster installation, and lower maintenance costs, all without the use of batteries. The energy harvesting mechanism is powered by the motion of the user pressing the switch and is designed to operate maintenance-free for 20+ years. ILLUMRA Self-Powered switches have been reliably controlling EnOcean compatible lighting systems for 10 years.

“Bluetooth is compatible with everybody’s smartphones, which come with a nice interface that people are already familiar with and are using. Our switch will add a new level of convenience for users who want to control smart lights with a physical switch in addition to an app,” said Jan Finlinson, President of ILLUMRA. “We are excited to offer the proven Self-Powered Wireless Switch technology to Bluetooth OEMs to enable flexible switch placement, no new wires, no maintenance, and simplified installation.”

The Bluetooth enabled Self-Powered Wireless Light Switch communicates with globally-compliant Bluetooth solutions, and creates new opportunities for wireless controls. It’s available to OEM companies for control of LED light bulbs, dimmers, and lighting control systems, and is available with custom branding options. The Bluetooth Self-Powered Wireless Light Switch is compatible with standard rocker-style faceplates. Products are currently available in a variety of colors for qualifying OEM’s.

With the market’s increasing focus on energy conservation, it’s time to become a part of the wireless control movement that uses automation and power-saving technologies to reduce energy consumption.

 

About Bluetooth® Wireless Technology

Bluetooth technology is the global wireless standard for simple, secure connectivity. Propelled by a global community of nearly 30,000 companies, Bluetooth serves to unify, harmonize, and drive innovation in the vast range of connected devices all around us. Through collective creation and shared technical standards, Bluetooth simplifies, secures and enriches the technology experience of users worldwide. Find out more at www.bluetooth.com

Download this press release.

Go to the press page.

FAQ

Frequently Asked Questions

 

  • Q:How do self-powered wireless light switches work?
  • A: ILLUMRA wireless light switches do not use batteries or wires. Instead, the motion of a switch press generates enough electricity to send a radio signal to any ILLUMRA receivers within range (about 50-150 feet). It can control lights or other electrical loads. In the case of lights, it is hardwired behind the light fixture.
  • Q:Who uses ILLUMRA products?
  • A:Many designers, builders and electrical contractors use our self-powered wireless light switches during construction or retrofitting. Using this kind of technology saves time – there is no need to fish wires, knock through walls, or add expensive wiring. Customers will find this product ideal for adding switches to stairways, basements, closets, detached garages and for removing pull chains.
  • Q:What are the advantages of ILLUMRA wireless products compared to traditional switches?
  • A:ILLUMRA wireless controls eliminate the need for traveler or switch leg wires, making installation easy, fast, and non-destructive. Additionally, wireless technology allows for the use of expansions such as motion-sensors to manage light systems automatically.
  • Q:How do ILLUMRA products help me save energy and money?
  • A:ILLUMRA self-powered wireless light switches use no external energy and produce no energy waste. Additionally, the ILLUMRA product line allows motion and occupancy sensors, wireless thermostats, or a single master switch to make reducing energy use simple and convenient.
  • Q:How long do ILLUMRA products last?
  • A:315MHz ILLUMRA products come with a 3-year warranty, 902MHz ILLUMRA products come with a 5-year warranty and are rated to operate for a lifespan of over 20 years.
  • Q:Can ILLUMRA wireless products be used to control devices other than lights?
  • A: Yes! ILLUMRA products can be used to control just about anything. Common examples include HVAC systems and motors.
  • Q:Where are ILLUMRA products made?
  • A: ILLUMRA products are made in the USA with components from various countries.
  • Q:Are ILLUMRA products FCC approved?
  • A: Yes. All ILLUMRA products are FCC approved.
  • Q:Are ILLUMRA Products UL approved?
  • A: ILLUMRA products are ETL approved. This means they meet or exceed the UL and CSA standards.
  • Q:Can I use fluorescent lighting?
  • A:Yes. ILLUMRA receivers work well with fluorescent lighting. Fluorescent lighting is a great way to reduce high wattage loads and energy costs. See receiver specifications for wattage ratings of different load types.

 

 

  • Q:How long do ILLUMRA products take to install?
  • A:Most ILLUMRA products install easily within minutes.
  • Q:Can ILLUMRA wireless controls co-exist with hardwired switches?
  • A:Yes, in some cases. ILLUMRA five wire single channel relay receivers (ExX-Rxx-xIBTP) are intended to be wired in the same circuit as a hard-wired 3-way switch. ILLUMRA Switch Leg Transmitters may also be connected to hardwired switches.
  • Q:Can I install a 3 or 4-Way switch with ILLUMRA products?
  • A:Yes! ILLUMRA wireless light switches are great for 3-way and 4-way switch applications. One ILLUMRA receiver connected to an electrical load can be programmed to respond to up to 30 wireless light switches that are within range. The ease with which new multi-way switches can be created is one of the great advantages of ILLUMRA products.
  • Q:Can I use ILLUMRA self-powered wireless light switches outdoors?
  • A:Yes. ILLUMRA wireless light switches can be used outdoors; such use may even achieve greater range than indoor use. When installing ILLUMRA wireless light switches outdoors, use a weather proof switch cover. Most electrical stores carry weather proof switch covers.
  • Q:What if I do not have access to the light fixture?
  • A:One way to install ILLUMRA controls without accessing the light fixture applies to retro-fit situations (NOTE: a neutral wire must be available for this option). First remove the hard-wired switch and install the ILLUMRA receiver in the hard-wired electrical switch box. An ILLUMRA wireless light switch can be installed over the switch box or a blank cover plate can be used to conceal the receiver. Other ILLUMRA wireless light switches can then be added in desired locations, creating single pole, 3-way, or 4-way light switches without running any new wires.
  • Q:How can I be sure the receiver is getting power?
  • A: In some cases, the receiver has a “Power” light which turns on only when the receiver is connected and powered. In other cases, you can test the receiver by pressing the LRN button. If the power to the electrical load the receiver is connected to toggles on and off, then the receiver is properly connected. You may also hear a faint clicking sound coming from the receiver during this test.
  • Q:Are ILLUMRA products easy to program?
  • A: Yes! Simply follow the installation guide shipped with the product. For most applications, programming is as simple as pressing a LEARN button on the receiver and then pressing a button on the desired light switch or other transmitter.
  • Q:Are all ILLUMRA receivers compatible with all ILLUMRA transmitters?
  • A: Yes. All ILLUMRA receivers can be taught to receive commands from any ILLUMRA transmitter. ILLUMRA accessories may be used in ILLUMRA control systems, but are not necessarily directly compatible with ILLUMRA transmitters or receivers. Some combinations of receivers and transmitters will not directly interact (for example, the Blind/Shade Controller receiver and the Occupancy Sensor).
  • Q:How many switches can a receiver respond to? How many receivers can a switch communicate with?
  • A: Most receivers can learn up to 30 switches. This means the receiver can memorize the unique ID of up to 30 switches and thus receive commands from them. A switch can send commands to an infinite number of receivers within range that have been programmed to respond to the switch (but never to a receiver that has not been programmed to respond to the switch).

 

 

  • Q:What kind of range do ILLUMRA products have?
  • A: ILLUMRA products typically achieve a range of about 50-150 feet. This distance can be extended an additional 50-150 feet by using a repeater, or up to 1 mile by using an ILLUMRA Industrial Wireless Relay.
  • Q:Can the wireless signals from ILLUMRA switches reach receivers through walls and other barriers?
  • A:Generally, receivers can sense signals through one or two walls, but range will be reduced by such obstacles. It is advisable to test the switch in a location before final installation.
  • Q:Can these devices be used around metal?
  • A:Yes. ILLUMRA wireless light switches and receivers can be used around metal; however, range may be significantly reduced. Metal tends to reflect and distort radio waves. To maximize range, use non-metallic cover plates and electrical boxes or mount outside metallic enclosures.
  • Q:Will interference activate my light? Will other switches accidentally activate my light?
  • A:No. Each ILLUMRA wireless light switch communicates by sending a unique RF packet to the receiver(s). Each packet contains coded information that is only related to that particular light switch. No two light switches will transmit the same packet. Receivers are programmed to respond to up to 30 specific switches of your choosing – and no others.
  • Q:Do ILLUMRA wireless products have a delay between when a switch is pressed and the light is turned ON/OFF?
  • A: There is no perceptible delay between the time a switch is pressed and the light turns ON/OFF.

 

 

  • Q:How does the affordability of ILLUMRA products compare to other options?
  • A:Because ILLUMRA products do not require copper wire, labor costs associated with running wire, labor costs involved in cutting and repairing wall, installing ILLUMRA products is often comparable in cost or even cheaper than installing a traditional wired system. ILLUMRA products especially excel in cutting the cost of systems which would have required a large fee for the labor involved in installation. By helping to reduce energy consumption, ILLUMRA products also help you to save money on utilities.
  • Q:Can I purchase ILLUMRA products locally?
  • A: Many electrical wholesale distributors in the USA carry ILLUMRA products. If the store carries Leviton products, they are eligible to carry ILLUMRA self-powered wireless controls. If there is not a distributor close enough to suit your needs, call (801)225-2226 to order.
  • Q:Can I become a distributor of ILLUMRA products?
  • A: Yes. Electrical Wholesale distributors in the USA should contact Leviton to inquire about distribution opportunities or to place orders. International and other distributors should complete the Distribution Inquiry Form online. Please see online instructions found.

 

 

  • Q:How well do ILLUMRA products blend with their surroundings once installed?
  • A:ILLUMRA receivers stow nicely in most junction boxes and are not visible at all after installation. ILLUMRA decorator switches are sleek, fashionable, and come in a variety of colors and styles (including one that looks just like a traditional decorator switch). With ILLUMRA, you get both form and function.
  • Q:Can I use ILLUMRA wireless light switches in a multi-gang configuration?
  • A:Yes. ILLUMRA decorator style switches can be used in a gang configuration with or without the included back plates. The following options are available:With a back plate - ILLUMRA wireless light switches can be surface mounted, requiring no switch box, in a gang configuration by using a back plate. In this method of installation, the light switches stand out about 3/8th of an inch (about 1cm) from the wall. Backplates are available in 1, 2, and 3 gang options; additionally dual rocker switches can be used in place of single rocker switches to provide a maximum number of switches in a minimum amount of space. For example, a 3-gang backplate could be fitted with 3 dual rocker switches to create 6 functional light switches.Without a back plate - ILLUMRA self-powered wireless light switches fit traditional switch boxes and can be installed in a gang configuration in existing switch locations. Another method of installing the light switches in a gang configuration without using a backplate involves using a mud ring. A hole will need to be cut in the wall where the mud ring will be mounted. Using ILLUMRA wireless light switches without a backplate matches the appearance, including depth, of a hard-wired decorator switch installation. ILLUMRA dual rocker switches may be used without a backplate in a multi-gang installation.
  • Q:Can I use a configuration greater than 3-gang?
  • A:Yes; however, backplates are not available in styles greater than 3-gang. Therefore a switch box or mud ring must be used to implement a multi-gang switch greater than 3-gang. As a cover plate, use a standard Decorator switch cover plate with the appropriate number of slots. Another method of installing multiple switches at one location is to use ILLUMRA dual rocker wireless light switches. ILLUMRA dual rocker light switches allow 2 light switches to exist in a 1-gang width. This allows a maximum number of switches to exist in a minimum amount of space. For example, a 3-gang backplate could be fitted with 3 dual rocker switches to create 6 functional wireless light switches.
  • Q:Are ILLUMRA switches available in a “toggle style” switch?
  • A:Not at this time.
  • Q:How large are ILLUMRA receivers?
  • A: Size varies from model to model, but all single-channel receivers are roughly 2.1” x 1.8” x 1.1”. Many multi-channel low voltage receivers measure roughly 2.9” x 1.3” x 0.7”.

 

Ballast:
A ballast is a device intended to limit the amount of current in an electrical circuit. Ballasts are often used with fluorescent lamps with fluorescent tube light bulbs fitting into the ballast.
Load:
An electrical load is the end device which is receiving electrical power. In the case of lighting systems, it is the lights themselves.
Receiver:
Transmitters (such as switches) send wireless signals to receivers.
Transceiver:
Transceivers perform the functions of both transmitters and receivers (Receiver and Transmitter).
Transmitter:
Transmitters (such as switches) send wireless signals to receivers.

 

Introducing ILLUMRA Estimator and Contractor Guides

ILLUMRA introduces its new Estimator and Contractor Guides that make understanding and installing ILLUMRA wireless controls simple. ILLUMRA contractor guides provide all the necessary information to allow product specification, system creation, and installation of common lighting and HVAC wireless control solutions.

The new guides offer helpful tips and instructions on creating wireless control networks such as conference room and hotel room control systems and more using self-powered remote light switches, occupancy sensors, and other innovative ILLUMRA products. View the Guides online at www.ILLUMRA.com/Training.

Every project and control system is different; this makes it necessary for contractors to spend valuable time trying to figure out if a particular brand of controls is right for the job, which components of that system are needed, and how to install the components. ILLUMRA wireless controls are adaptable and can be used in a variety of projects. ILLUMRA Estimator and Contractor Guides teach which ILLUMRA products to use and how they fit together, eliminating electrical project hassles, speeding project delivery, and helping contractors and specifiers WOW their customers. The new Estimator and Contractor Guides allow specifiers and contractors to quickly and simply create the control system a customer needs.

All controls in the ILLUMRA product line are designed to install quickly and easily, provide custom lighting and HVAC controls, and reduce excess energy consumption. “The contractor guides are designed to teach about the total control system. They address common applications and make life easy for specifiers and contractors,” said Colby Gibson Sales and Marketing Manager with ILLUMRA.

Each ILLUMRA contractor and estimator guide addresses a common application and shows how to easily install components to create the desired system. The guides feature floor plan diagrams, ILLUMRA products used, wiring diagrams, and estimated installation times. From product specification to installation, ILLUMRA contractor guides walk specifiers and contractors through the ILLUMRA product purchasing and installation process. Using the guides, a specifier can know exactly what components to include in a project and a contractor can know just how to connect the components to create a system.

See the most recent contractor guides by clicking here. Check out the page often, as new guides will be added regularly.

Explore www.ILLUMRA.com to learn more about ILLUMRA Self-powered Wireless Controls.

WalaLight Compatible Bluetooth Battery-free Wireless Light Switches

Part Numbers

BTT-S1AWH (single rocker, white)

Wireless Bluetooth Switch

BTT-S2AWH (dual rocker, white)

Wireless Dual Rocker Switch

BTT-S1EWH (single rocker Euro, white)

BTT-S1EWH

BTT-S2EBK (dual rocker Euro, black)

 

WALALIGHT BATTERY-FREE WIRELESS LIGHT SWITCHES

WalaLight logo

WalaLight Compatible Wireless Bluetooth Switches by ILLUMRA

ILLUMRA self-powered wireless Bluetooth® switches can work with WalaLight-enabled Bluetooth mesh devices and can be configured by using the WalaLight app.

WalaLight provides a robust lighting control technology based on the globally interoperable Bluetooth mesh standard. You can easily add ILLUMRA self-powered wireless Bluetooth® switches to the ecosystem of different lighting components based on WalaLight-enabled Bluetooth mesh technology.  It will strengthen your competitive advantage and create new revenue streams.

WalaLight partnership with Illumra enhances our offering by adding multiple designs and colors, and optional text for the switch portfolio. The light switches are powered by kinetic energy-harvesting technology, allowing them to operate without the use of wires or batteries. A press of the switch converts a small amount of electricity, which transmits a wireless radio-frequency signal to controllers and other WalaLight devices within range. Switches can be mounted in an existing switch box or be surface mounted with screws or double-sided tape. Patented Tamper Resistant technology prevents the rockers from being removed without the use of tools, preventing exposure or damage to the components within the switch. There are 4 different models with multiple different SKU’s that are integrated into the total WalaLight solution controls

Networked lighting control with self-powered switches!  WalaLight provides intuitive apps for standard-compliant Bluetooth mesh lighting networks. Designed to support large-scale installations deployed in commercial environments, they offer powerful commissioning, fine-tuning, and everyday management features. The bottom line is faster ROI, shortened path to advanced control strategies, and facilitated compliance with building energy codes.

  • Mount switches within range of an WalaLight-enabled products (30-100ft)
  • No wires & no batteries required to operate the switches - kinetic energy
  • Never replace batteries with energy harvesting technology
  • Traditional Single and Dual Rocker switches are compatible with single/multi-gang switch boxes
  • Custom switch printing with words or icons is available
  • Additional switch styles coming soon

WalaLight Introduction Video

WalaLight Products

 

ILLUMRA switches

    • Single Rocker Switch (6 color options)
    • Dual Rocker Switch (6 color options)
    • Single Rocker Euro Switch (black, white)
    • Dual Rocker Euro Switch (black, white)
    • More styles coming soon
   
Custom Switch Printing
Custom switch printing is available for switches
using words or icons.
Description

ILLUMRA’s Self-Powered Wireless Bluetooth Switches provide wireless control of lighting and automation systems using battery-free energy-harvesting technology compatible with WalaLight products.  Two styles (traditional and European) are available for the North American market, and come in both Single Rocker (2-button) and Dual Rocker (4-button) options.  Optional printing of words or icons is available upon request.  Additional styles are in development and will be available soon.

Wireless Bluetooth switches can be placed anywhere within range of a receiver. The wireless light switch may be surface mounted on a wall with screws or industrial tape or mounted to a standard switch box or as a wireless handheld remote.

The energy harvesting technology used in the switches has proven reliability in the marketplace for over 15 years powering ILLUMRA’s low power wireless control product line. The mechanism is powered by the motion of the user pressing the switch and is designed to operate maintenance-free for 20+ years.

ILLUMRA European style light switches are wireless and battery-free, delivering a no maintenance solution.

 

Stocking Distributors

 

Switches fit into standard switch boxes.

Product Information Downloads

  • Data Sheet Single & Dual Rocker
  • Data Sheet Euro Single & Dual Rocker
How To Install Illumra Switches
  • Installation Guide - Single and Dual Rocker
  • Installation Guide - Euro Single and Dual Rocker
Support Links

 

Side-By-Side Comparisons

BTT-S1AWH comparison table

New ILLUMRA LED Dimmers Provide Ultra Smooth Wireless Dimming

ILLUMRA Self-powered Wireless Controls introduced its new 65,000 dim step 24VDC wireless LED Dimmer along with its new wireless 0-10V Dimmer at Lightfair 2009 in New York. The new wireless devices provide ultra smooth LED dimming at all light levels. The wireless dimmers provide users the ability to adjust light levels to their preferences and allow the use of energy saving LED lights with the convenience of quality dimming control.

The ILLUMRA wireless 24VDC LED dimmer overcomes a major challenge faced by standard PWM LED dimmers; the device eliminates the issue of choppiness at low dim levels. Through the use of thousands of PWM dimming steps, the ILLUMRA LED Dimmer creates what is perceived by the natural eye as a single continuous dim — even at low light levels. The dimmer can easily drive 12V or 24V LED fixtures and loads requiring up to 5 amps of current. A unique feature of the dimmer is that it can be controlled from any switch wired to its local control input, in addition to ILLUMRA battery-free, wireless light switches.

The 0-10V Dimmer is used to control dimmable LED power supplies or dimmable fluorescent ballasts. In addition to its industry-standard 0-10V output, the dimmer conveniently provides a fully isolated switch output driver. The driver can be used to control an external relay, contactor or power-pack, completely disconnecting the load when it’s not in use, thereby achieving maximum energy savings.

The wireless capability of the new ILLUMRA dimmers allows users to control or dim lights using self-powered wireless light sensors, wireless occupancy sensors, wireless light switches, or other ILLUMRA wireless transmitters. This means the dimmers are able to be used in a variety of applications such as architectural dimming, daylighting, load shedding, manual ON / automatic OFF control, and more. The dimmers can dim lights in response to wireless light sensors indicating when natural light is available. They can also turn off or dim lights in vacant rooms or hallways by responding to signals from wireless motion sensors; additionally, the dimmers can be manually controlled with self-powered wireless switches. Each dimmer has an input for a wired 24v sensor, stores up to 30 wireless switches or sensors in its memory, and may function as a repeater for use in ILLUMRA wireless control networks. The ILLUMRA LED Dimmers are FCC/IC approved and RoHS compliant to minimize the environmental impact over the life cycle of the products.

About ILLUMRA

ILLUMRA Self-powered Wireless Controls is the largest supplier in North America, of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. ILLUMRA provides simple wireless control systems that save energy, save time, and save money. ILLUMRA products operate using the EnOcean radio protocol, the wireless standard for sustainable buildings. EnOcean technology allows energy harvesting ILLUMRA transmitters to operate indefinitely without the use of batteries. The motion of a switch actuation, light on a solar cell, or other ambient energy in the environment provide power to ILLUMRA transmitters, creating zero-maintenance wireless devices. The ILLUMRA product line includes multiple products which operate in the uncrowded 315 MHz band offering greater transmission range than other wireless technologies and minimal competitive traffic.

For more information about ILLUMRA, please explore www.ILLUMRA.com, email [email protected], or call 801-349-1200.

###

ILLUMRA Door/Window Sensor Saves Energy

ILLUMRA, the leader in wireless battery-free controls, announced the release of a new solar powered wireless Door/Window Sensor. This new product maximizes the energy savings of heating and air conditioning systems by providing wireless status of windows and/or doors. The breakthrough technology may be seen at the GreenBuild Show in Chicago, Illinois (EnOcean/ILLUMRA booth #583).

Door/Window SensorEnergy waste can be reduced by 20 to 60 percent by disabling blowers and/or adjusting temperature setpoints in HVAC systems when windows and doors are left open. The wireless Door/Window Sensor is a key component to reducing energy waste in hotel, condominium and dormitory buildings.

“We are excited to help building operators reduce energy waste through the use of the easy to install, tamper resistant, maintenance free window/door sensors,” said Jan Finlinson, Director at ILLUMRA. “Energy management professionals can leverage this product to reduce operating costs and the environmental impact of the buildings for which they are responsible.”

The wireless battery-free sensor communicates using the EnOcean protocol to a variety of compatible actuator and controller products: thermostats, relays, room controllers; as well as BACnet and Ethernet gateways for integration with energy management systems. The sensor also includes on board energy storage that can operate the device in darkness for several days.

The ILLUMRA light sensor is small, measuring only 3.86 x .62 x .81 inches (98.04 x 15.75 x 20.57 mm) and attaches easily to doors and windows (peel and stick). The ILLUMRA light sensor is made of recyclable plastic, is RoHS compliant, qualifies for LEED credits and helps buildings comply with International Green Construction Code standard 189.1.

About ILLUMRA
ILLUMRA is the largest North American supplier of self-powered, battery-free, wireless lighting control and energy management systems, and a member of the EnOcean Alliance. ILLUMRA products operate using the EnOcean protocol: the standard for low-power wireless communication. Transmitters harvest the energy they require from the motion of a switch, light on a solar cell, or from temperature differentials. This allows them to operate indefinitely without the use of batteries. Products are sold via dealers and OEM partners throughout the world. For more information about ILLUMRA and its products, please visit www.ILLUMRA.com, or call (801) 349-1200.

1 2 3 4